Re: 50" Philips 50PFP5332D/37 no picture, has sound

For a little more information I did remove the back of my set and check all my fuses with a fluke meter set on ohm's to sound when resistnace is good, every fuse beeped telling me that they are all ok. I did notice that when the set is on there is a Led blinking. the location is on the lower left board and the Led# is 2002. On the same board there are 2 other Led's and there numbers are 2000 and 2003 and they stay on solid! All the other Led's on the set stay on solid, so I am wondering is there a fault here and thats why...

I am new to this site. I recently got a Phillips 50PFP5332D/37 tv. I turned it on and I have sound and the picture is Dark, there is very faint color if any at all. I removed the back and checked all the fuses, all check out good. I did notice that there is an LED blinking in the lower left board of the main board mounted center of the screen. On the board there are two other LED's # 2000 and 2003 they stay on solid. Are all LED's supposed to stay on or is this telling me there is a fault, if so anybody know where I can find the problem?

Re: 50" Philips 50PFP5332D/37 no picture, has sound

Hello I am new to this site, I recently got a 50 PFP5332D/37 tv. I turned it on and I have a very dark screen, almost No color to it at all, I do have sound. I tried plugging in my dvd player and that does play and I have audio but again the picture is almost all very dark. When I try to select the menu button my screen pixels seem very slow to operate, the screen seemed to slowly fill in in various spots but eventually did fill in. The blue light is on in the front and I did notice 1 green light on in the back, not sure if...