I got this monitor which I've fixed the first time around by replacing the inverter/power supply with one I bought from [URL="http://www.shopjimmy.com/envision-6204-7922904001-power-supply-backlight-inverter.htm"]Shopjimmy[/URL].

After a couple of years of use, this monitor is experiencing some flicking horizontal lines (see photo gallery + Youtube video below). This monitor is actually fine right after turning it on after not being in use for a while. But after 5 minutes when the monitor warms up, the horizontal flickering will be apparent. And if I move the window in...

Re: Envision G218A1: Indicator LED Turns off then on

I took some new pictures and resized them to fit the attachment limitations. And for some reason the option to edit my original post is not available. But the GIF is too large to be an attachment anyways.

As for measurements, the multimeter I was using was working perfectly fine, tested it on some regular 1.5 volt batteries and they were reading the voltage perfectly fine and tested it on a a couple of resistors I had and it read that fine.

What I meant when I said that the measurements I took didn't...

Hello, I've got this G218A1 monitor and I think there is something wrong with the inverter power board.

What happens now is that it will turn on, screen stays black and the blue LED. Then after about 5 seconds, the blue LED turn off and kind of cycle through it. For clarity I've added a GIF i've made of my problem:


[url]http://s14.postimage.org/ssxda2fb3/image.gif[/url]
Please ignore my lack of keeping a steady hand and the camera focusing, its my smartphone's camera.


I've also included fairly high res pictures of my monitor's...