Re: Viewsonic VX2235WM - blank screen on/off
One more item I am not sure I mention it or not. After I notice the black screen; I turn off the monitor and power it back again and then it works for awhile and then went black again. I am not sure this is an indication of something else is wrong! Thanks.
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Re: Viewsonic VX2235WM - blank screen on/off
I try to further taking the sheet metal apart but I didn't make it far enough to see the fluorescent tubes. So, I am not sure there is any dimming around the lamps? Here are more pictures of the PCBA. Thanks....
Leave a comment:
-
Re: Viewsonic VX2235WM - blank screen on/off
Thanks for your help. I didn't see the two covers over the neck supporting bracket. Once I pull those out everything is easy.
I checked the pcb and didn't notice any swollen caps. Am I looking the right parts? I can only counted 12 brown caps in the pcb. Any suggestion on what to check next? I have a voltmeter should I be checking for any values between each of those caps? Thanks....
Leave a comment:
-
Re: Viewsonic VX2235WM - blank screen on/off
budm,
I tried taken off the base and ply on the taps in the bottom of the frame. So far I only have the 3 taps from each sides pop opened. The middle section appears to have screws in the middle holding the frame together. I try removing the base arm but w/o luck. Please any one out there can share some light on this topic so I can take the housing apart? Thanks a bunch!
Again I have the VX2235WM-3
Leave a comment:
-
Re: Viewsonic VX2235WM - blank screen on/off
Have not dis-assemble the housing yet so I am not sure any caps have domed out? So, I should follows your instruction for the WM-3 and ply out the speaker grill to starts, yes? If you can be so kind please point me to the right direction to start taking the unit apart? Thanks.
Leave a comment:
-
Re: Viewsonic VX2235WM - blank screen on/off
Thanks for those photos; my unit is the one in last set of your photos. VX2235WM-3; model #-VS11446. Since I am not an electronic tech and I am looking for an easy way out. Should I go ahead to replace those caps and take a chance to see will it taken care of my problem? While I was surfing the web I also find a better repair kit for less money.
[URL="http://www.ebay.com/itm/Viewsonic-VX2235wm-REPAIR-KIT-Inverter-LCD-Monitor-/220640945018?pt=US_Monitor_Replacement_Parts&hash=item335f39a37a"]http://www.ebay.com/itm/Viewsonic-VX2235wm-REPAIR-KIT-Inverter-LCD-Monitor-/220640945018?pt=US_Monitor_Replacement_Parts&hash=item335f39a37a[/URL]...
Leave a comment:
-
Re: Viewsonic VX2235WM - blank screen on/off
Thanks for your feedback. But there are no photo in your link? Please resend?
Leave a comment:
-
Viewsonic VX2235WM - blank screen on/off
Hello All, good to learn that there are people like you guys out there! I am a handyman but new to electronics. This is an area I try to stay away. Stated yesterday while working on my pc my VX2235WM went blank on me. The LED stay blue but no picture; as I move the mouse around I notice a white line pops in/out horizontally on the screen. I have checked all connections and they are fine. Same thing happen to a laptop I hookup to the monitor. While I check on line there are many suggestions about the problem with the power inverter. Also, there are the following links shown the service manual and...
No activity results to display
Show More
Leave a comment: