Re: Dull Belinea 1925 S1W

I'll buy them, swap them (all that are same uF and V) and post again if I get anywhere.
Thanks for the help.
To be continued. .......

Re: Dull Belinea 1925 S1W

I'll try replacing them.
I'm a relative novice to the theory side but the practical work will be no problem.

Do these look like suitable replacements?

[url]http://www.ebay.co.uk/itm/330uf-16v-Capacitor-by-Panasonic-10-pack-11-5mm-x-8mm-/220900176723?pt=UK_BOI_Electrical_Components_Supplies_ET&hash=item336ead3353[/url]

If the link doesn't work, it's item number 220900176723

Should I replace all the 330uF caps or just the obviously sick ones?Re: Dull Belinea 1925 S1W

I'll

Re: Dull Belinea 1925 S1W

Update-

I had a better look at the boards and I've noticed swollen caps on the main board.
The one at the top (next to screen connector) and two of the group of four to the lower right.
All are "CapXon" 330microfarad 16v.
They look like they may be leaking.

Is this likely to be the fault and will replacing them cure it?

Appologies for the images. Bad light, no tripod and shakey hands.

Gareth...

Re: Dull Belinea 1925 S1W

I've tried several PCs with the same result.
I suspect the main board as the OSD menu window is as bright as ever.
Is there any chance of an economical repair?

Hi all,
I have the above monitor which had given good service until it suddenly went very dull.
The backlight seems to be working and the OSD is nice and bright, but the rest of the picture is very dull.
Brightness and contrast are wound up to max.
Don't know if this is relevant but it will only work when colour temp is set on "Custom Colour" with RGB all set to 100%. If I select a preset colour temp (9300K or 6500K) the display goes blank.
I have opened the unit and had a quick look at the boards but didn't spot anything obvious.
Can anyone...