Re: Are all Caps the Same?

Well it seems to be working. The new caps are smaller than the old ones so I hope it lasts.

Thank you all for your input.

Re: Are all Caps the Same?

Thanks for your quick replies. I can't get both caps in that series, does it matter? Or should I get them both in the same series such as the Nichicon PS.

Re: Are all Caps the Same?

Size? I don't know, the norm sounds good. They appear to be 12mm x 6mm, give or take a mm. This is the extent of the writing on the caps:
47uf16v
105c
A9149
Nichicon
PC(M)

10uf63v
105c
A9150
Nichicon
PC(M)

I can't find these listed on the Nichicon site. They must be obsolete.

Re: Are all Caps the Same?

I added photos as requested. Sorry they aren't good, taken with my IPad.
Further inspection revealed they appear to be made by Nichicon.
47uf16v105 #A9149
10uf63v105 #A9150

I can also see "PC(M)" on the side of each....

Hello I'm new here. Let me explain why I'm here and then get back to my question.

Well, my 1992 Ford F150 is not working and after searching the net for some ideas, the common cause for my trucks symptoms seems to be the onboard computer (EEC/PCM). I pulled my computer and sure enough there are 3 caps on the board that appear to be bad (easily move to the touch and burnt marks at solder joints). My research has shown that this seems to be common cause of failure on these computers. I can't see a manufacturer of the Caps but two of them are 47uf16v105 and one is 10uf63v105. ...