Re: Sony KDL-46W4000 (2 blink code)
Hi Budm,
Are you able to still help? I left it this long as I didn't want to bother you.
If it's too much to try help on here further then it's probably better to just sell off the TV to someone else.
Thanks
funtastic
Senior Member
Last Activity: 03-06-2018, 07:58 PM
Joined: 11-29-2012
Location: Dargaville
-
Re: Sony KDL-46W4000 (2 blink code)
Thank you for your replies.
Are you able to help further sometime or is that as far as you can go with me? Its okay if you can't.Leave a comment:
-
Re: Sony KDL-46W4000 (2 blink code)
Had the red test lead in the wrong socket before.
At 20nf it fluctuates from 17.66 to 17.70.
At 2uf it's .018
Yes I tested it out of circuit.Last edited by funtastic; 02-28-2015, 07:31 AM.Leave a comment:
-
Re: Sony KDL-46W4000 (2 blink code)
Hey Budm,
I got a DMM but it's giving out 0 capacitance if I'm testing it correctly? I've attached a picture of the DMM. To test it says to put it onto uf setting and to insert into test holes on the top right and not to use the test probes. Is this correct? Tried it on all the uf settings and it's still 0....Leave a comment:
-
Re: Sony KDL-46W4000 (2 blink code)
Okay I'm going to get a better DMM that can measure capacitanceLeave a comment:
-
Re: Sony KDL-46W4000 (2 blink code)
Thank you for the replies.
I did ask if I needed an esr meter in the previous post but I felt it wasn't answered so I went ahead with the DMM.
I'll buy one off ebay. Unfortunately it'll take a few weeks to receive. I'll post when I get it.Leave a comment:
-
Re: Sony KDL-46W4000 (2 blink code)
I removed C6111 from circuit and from what I read to put DMM on Ohms? It read nothing at all, tried volts as well and nothing came up.
When I had C6111 in circuit and at 2000k it showed 270 Ohms and 0.02 Volts. With the switch activated it showed 384 Ohms.
Tested R6120 and that showed 00.8 Ohms at 200 on DMM.
Attached a picture to confirm I tested the right ones....Leave a comment:
-
Re: Sony KDL-46W4000 (2 blink code)
Thank you for your reply.
Do I need to get an ESR meter to test the capacitance? I only have a very basic DMM.Leave a comment:
-
Re: Sony KDL-46W4000 (2 blink code)
anyone?Leave a comment:
-
Hey mate,
Any chance you could get back to helping me again please?
[url]https://www.badcaps.net/forum/showthread.php?t=43622&page=2[/url]https://Hey mate,<br /> <br /> Any...2&page=2[/url] -
Re: Sony KDL-46W4000 (2 blink code)
.Leave a comment:
-
Re: Sony KDL-46W4000 (2 blink code)
Help pleaseLeave a comment:
-
Re: Sony KDL-46W4000 (2 blink code)
anyone want to continue helping please?Leave a comment:
-
Re: Sony KDL-46W4000 (2 blink code)
just when you're able to help again Budm that would be great.Leave a comment:
-
Re: Sony KDL-46W4000 (2 blink code)
I appreciate it.
How do you find the time to help out so much with everyone?Leave a comment:
-
Re: Sony KDL-46W4000 (2 blink code)
Touching the two probes together is 1.4 - 1.6 and on the resistor it's 1.9 -2.0 with no powerLast edited by funtastic; 01-24-2015, 10:29 PM.Leave a comment:
-
Re: Sony KDL-46W4000 (2 blink code)
With the switch activated it's reading 1.6Leave a comment:
-
Re: Sony KDL-46W4000 (2 blink code)
Put multimeter on 200 ohms and it measured 3.6 then dropped and fluctuated between 2.7 -2.2Leave a comment:
-
Re: Sony KDL-46W4000 (2 blink code)
Sorry I'm new to testing a resistor, how should I test it? Probes either side on 200 ohms?? This is the resistor correct? Just would hate to do something wrong....Leave a comment:
-
Re: Sony KDL-46W4000 (2 blink code)
As soon as relay clicks the second time it goes back to 316vLeave a comment:
No activity results to display
Leave a comment: