Thank you to the guys at HEGE supporting Badcaps [ HEGE ] [ HEGE DEX Chart ]

Announcement

Collapse
No announcement yet.

User Profile

Collapse

Profile Sidebar

Collapse
Avatar
therealovy77
Member
Last Activity: 07-28-2023, 05:01 AM
Joined: 11-28-2012
Location: Braila
  •  
  • Filter
  • Time
  • Show
  • Source
Clear All
new posts

  • Re: Lenovo Ideapad 3-15ALC6 LCFC HS461/HS561A/HS761 NM-D521

    Thank you for schematic, I solved my laptop, it was an shorted capacitor on 19v.
    P.S. Those small (soldered) jumpers on board were very helpful....
    See more | Go to post
    Last edited by therealovy77; 11-29-2022, 03:18 PM.

    Leave a comment:


  • Re: Schematic needed for Samsung Power Supply BN44-00502A

    Problem solved.
    I buyied another power supply module second-hand (from an TV with broken screen) and I solved the problem.
    Thanh you.
    See more | Go to post

    Leave a comment:


  • Re: Schematic needed for Samsung Power Supply BN44-00502A

    Hello from Romania. I have problems with the same power supply in an UE40ES5800. When I apply power, i hear a buzzing noise in power supply, and the stand-up led blinks twice, and then stop buzzing (with solid red led). After that, this cycle repeats....
    The LEDs connector gets 5-6 volts on left and ZERO on right, and goes down to zero both after.
    I think the power supply is broken, but i ask you for help.
    What voltage must be on led connector (left and right) at power up (with and without LEDs connected?...
    See more | Go to post

    Leave a comment:


  • Re: P170EM with GTX970m bios and vbios

    The card was fried (some memoryes were short-circuited), so after i get them down from the board, i did made some tests ..
    I put Clevo bios on it and is recognized by name in my notebook bios correctly. Windows also recognized it correctly and tryed to install a driver. But after that, other memoryes fried too (memory voltage was zero again) and the card was not detected
    So, my opinion is: a Dell (Alienware) cards works in P170EM, but with a Clevo BIOS (i did not tested it with Dell bios).
    I'll be back with news.
    See more | Go to post
    Last edited by therealovy77; 09-23-2022, 06:32 AM.

    Leave a comment:


  • Re: P170EM with GTX970m bios and vbios

    [SIZE="3"] No one?[LIST=1][/LIST][/SIZE]Re: P170EM with GTX970m bios and vbios

    [SIZE="3"] No one?[LIST=1][/LIST][/SIZE]
    See more | Go to post
    Last edited by therealovy77; 09-13-2022, 05:31 AM.

    Leave a comment:


  • Re: P170EM with GTX970m bios and vbios

    I got a Dell GTX675m from a friend, but is not detected in BIOS, it says at VGA : N/A (with the GTX970m it says EMPTY).
    I know that a lot of people says that Dell video cards do not work in Clevo notebook, but why? Is it hardware or the vBIOS? In pictures, the two boards (Clevo and Dell) looks the same to me.
    I can desolder and reprogram the vBIOS chip with Clevo BIOS, but is hard to do this and I need to know if this is the only solution, that someone did it and it worked...
    Thank you.
    See more | Go to post
    Last edited by therealovy77; 09-07-2022, 08:23 AM.

    Leave a comment:


  • P170EM with GTX970m bios and vbios

    Hello from Romania.
    I have an old Multicom (Clevo) P170EM, with Prema BIOS P150EM_17_11_PM_v2 (from old times, when it was free on internet). By the way, i still have this bios available for someone who wants it.
    I buyied an Clevo GTX970m 6GB MXM video card to upgrade my dead card, but I cannot make it to function properly in my notebook. I understand that I need a special Prema vBIOS to make it work on my notebook.
    So, i ask anyone who has this vBIOS on his computer (or can save it from an working card in a laptop) to help sending it to me.
    Any ideas are welcome.
    ...
    See more | Go to post
    Last edited by therealovy77; 08-19-2022, 02:34 PM.

  • therealovy77
    replied to HP ProBook 450 G3
    Re: HP ProBook 450 G3



    No, not working,is no difference.
    Starts without image, caps lock + num lock blinks 5 times, after that the cooler start spinning fast (maximum speed)....
    See more | Go to post

    Leave a comment:


  • therealovy77
    replied to HP ProBook 450 G3
    Re: HP ProBook 450 G3

    Hello. my name is Ovidiu, from Romania, i have a BIOS with problems (i think it is): no image on screen, caps lock + num lock blinks 5 times at power on, then fan at max.
    i5-6200u, UMA (intel) video.
    DA0X63MB6H1 rev.H
    HP 830931-601...
    See more | Go to post
    Last edited by therealovy77; 02-04-2022, 09:17 AM.

    Leave a comment:


  • Re: Acer At3201w will power up sometimes

    I didn't changed yet the Rubycon's on the main supply. I changed only the capacitors on 5V output stand-by line and the 400V main capacitor with some standard Nichicon capacitors. I cannot tell for sure because i reassembled the TV, but, if it is important, i can disassemble it again and check them.
    See more | Go to post

    Leave a comment:


  • Re: Acer At3201w will power up sometimes

    I came with news. I buyed a new control board (or that's i was told) from ebay and i get to another weird thing: when i power the TV from the power supply's switch for the first time it stays in the same status like before (orange led on, and the rest of the TV in stand-by, and with some audible whistle from the power supply like an lower frequency than normal). But, if i turn off and on again the power supply's switch, the TV work normally (no whistle from power supply and the TV can be turned on/off fine from remote) until i cut the power...
    See more | Go to post
    Last edited by therealovy77; 02-08-2013, 02:40 AM.

    Leave a comment:


  • Re: Acer At3201w will power up sometimes

    Did you try to change the two 100uf/16v "(in)famous" capacitors from the processor board?
    Look at the picture.

    P.S. I'm fighting with mine (it stays always in stand-by, orange LED on), i replaced and checked all parts according to forum tips. I can bring it up only with one resistor of 2K2 between 5V (std-by) and the power supply's stand-by controll pin.If i do that, LED come green, and TV works normal (with the resistor still connected) until i try to shut it down by remote or button panel.
    Any ideea for...
    See more | Go to post
    Last edited by therealovy77; 11-28-2012, 04:17 AM.

    Leave a comment:

No activity results to display
Show More
Working...
X