Re: Emerson LC320EM2F power light blinks, doesnt turn on

Thanks again for all your help, I will go ahead and pick up a multimeter tomorrow to double check that is what I will need, then order the repair kit you have linked. Ill post back here with the results once I get it up and running again!

Re: Emerson LC320EM2F power light blinks, doesnt turn on

DS1A1127126212 is my serial number And the board pictured wouldnt work I dont think, since the spot where the power cord plugs into is different than on the 2(the one I have) and 3 boards.

Re: Emerson LC320EM2F power light blinks, doesnt turn on

The seller is an Ebay store.. The difference between the pictured board and my board is the last number is a 1 instead of a 2 on the part number.. The boards with a 2 are about $60 for an identical looking board..

Board I am looking at:
[url]http://www.ebay.com/itm/ws/eBayISAPI.dll?ViewItem&item=160903051926&item=160903051926&lgeo=1&vectorid=229466[/url]

As for replacing the Diode, i have limited experience in soldering, and own none of the materials to remove the old one nor...

Re: Emerson LC320EM2F power light blinks, doesnt turn on

Ok, I will get a meter tomorrow. If I do find a popped diode, would replacing the board make more sense? I dont have a soldering iron or anything else with that. I need a meter for other things in the future anyway I am sure. I would link the board I found but I am unsure of posting outside links on here. Thanks for all your help!

Re: Emerson LC320EM2F power light blinks, doesnt turn on

I can look into getting a multimeter tomorrow from the local hardware or pawn shops. The pictures of both boards together, then the close up of each are attached.

I am guessing my issue is with the board the power plugs directly into, but both boards are pictured just in case. The fuse is intact because the picture does not show it.

If it is the Diode, since it would be difficult for me to remove the broken one and replace and resolder, plus the cost of buying all new tools, should I just buy a new...

Hello all, I am new to your site, but it looks like I could be spending some time here looking and learning.

Long story short, I bought this tv black friday of last year (so one year and 2 days ago) I get home today, try to turn the tv on, the power light just blinks. No screen flash, nothing. Unplugging it and plugging it back in causes the power light to blink 6 or 7 times before going to the usual solid red light of off. I opened up the back, and everything looked good.

Experience wise, I have been building computers awhile now, but I do not have any tools other...