Re: Iiyama Prolite E431S Turns off
So far so good no problems very good monitor 8ms response 17in screen very happy as it was given to me by one of my customers.
I supplied the LCD screen 3 years ago and it broke 1 month after the warranty runs out oh well, strange to think that it has come back to me .
So in at cost £18 to fix not bad really and I have a few spare caps that my be useful.
Mike
spunkmyer
Member
Last Activity: 04-21-2008, 12:58 AM
Joined: 04-06-2008
Location:
-
Re: Iiyama Prolite E431S Turns off
Ok...................
Here goes............. Removed the 1000uf 16v cap but it took some time as I am good with solder work but not on this scale of size.
Cleared out the old solder,put it to position the 1200uf 16v using the wait of the board to keep it close to the pcb then using solder lent by a good friend who is the electronics engineer who suggested this type of solder for pcb work, soldered the cap in to place carefully making sure not strays of solder.
After this decided to test the screen so...Leave a comment:
-
Re: Iiyama Prolite E431S Turns off
Cheers guys........
OK I have order the 1200uf 16v caps and the 470 16v caps from RS. they should be here next Tuesday.
A friend at work is a whiz at solder work and has offered to do the soldering if I get stuck but I wont learn if I don't try so........ the old trusty dead motherboard will get some use for practice as i'm ok with solder work but.......
As always I will keep you posted
MikeLeave a comment:
-
Re: Iiyama Prolite E431S Turns off
Ok well been looking for these caps on three different sites and RS seems to be the best site for me as one has a £20.00 limit on it (farnels) anyhow RS does not have any 1000uf 16v fc or fm caps but it did suggest this cap as an alternative
[url]http://uk.rs-online.com/web/search/searchBrowseAction.html?method=getProduct&R=3654098[/url]
would this be ok.
MikeRe: Iiyama Prolite E431S Turns off<b...to be the bestLeave a comment:
-
Re: Iiyama Prolite E431S Turns off
Thanks for all your support so far I will keep you informed.
MikeLeave a comment:
-
Re: Iiyama Prolite E431S Turns off
Ok after doing some reading can you confirm these caps to be a good replace ment for the 1000uf caps and the 470uf caps:
1000uf 0.39p
[url]http://uk.farnell.com/jsp/search/productdetail.jsp?sku=1219463&N=401[/url]
470uf
[url]http://uk.farnell.com/jsp/search/productdetail.jsp?sku=1219462&N=401[/url]
There is also two more caps on the psu board which are 150uf 25v
cant seem to find a 150uf in panasonic but can find a 220uf would this be ok not sure...Leave a comment:
-
Re: Iiyama Prolite E431S Turns off
Again thanks for the advice..........
Ok the two blue caps are 470uF 16v lt 105c
the large black cap is 1000uf 16v le 105c
and the smaller black cap is 1000uF 16v le 105c
cheers
MikeLeave a comment:
-
Re: Iiyama Prolite E431S Turns off
Thanks for the reply...........
Ok I'm new to this sort of thing though I am good with soldering iron, yep that is my board and you think I should replace the cap ok I need a little more help on the the type and model of cap to buy.
As far as the sleeve missing you stumped me as I open the case up and thats how it was?
many thanks.
MikeLeave a comment:
-
Re: Iiyama Prolite E431S Turns off
Ok here are the pictures, I have ringed the cap that I thinks is bad in red.
Mike...Leave a comment:
-
Iiyama Prolite E431S Turns off
Ok the problem is it will turn it's self off after 2-3 seconds and go back to the standby orange lamp.
After reading through the forum I did see another post about this screen in which the same thing was happerning and the chap replaced two caps and fixed his problem.
I have checked all the caps on the video and psu board and all the caps look ok no bulging or leaking as far as I can see bar one which is the biggest cap on the psu board.
Not sure how to upload pictures but i will try.
Mike
No activity results to display
Leave a comment: