Hi got a small problem with a TV I had given to me it works fine other than im getting GREEN DOTS flickers all over the screen, even on the menus. IT seems to get worse depending on colors but who knows.

Any info would be helpfull as i am going to try fix this my self.

Re: Hanns-G HG281D

their delivery is Free! next day.

Their capacitor brand is Rubycon are they ok to use

YXF Al electro cap,100uF 16V 105deg C
224-4173

Rubycon
16YXF100M6.3X11
RoHS status: Compliant

[url]http://uk.rs-online.com/web/p/aluminium-capacitors/2244173/?searchTerm=16v+100uf+105deg+c&relevancy-data=636F3D3226696E3D4931384E44656661756C74266C753D656E266D6D3D6D61746368616C6C7061727469616C26706D3D5E285C772B5B2D5C2E5C732F5D292B285C772B293F2426706F3D3926736E3D592673743D4B4559574F52445F4D554C54495F414C5048415F4E554D45524943267573743D3136762031303075662031303564656720632673633D592677633D4E4F4E4526[/url]...

Re: Hanns-G HG281D

Seems they dont have them in stock! any ideas as to where i can get them online

Re: Hanns-G HG281D



ok many thanks for your patience and time. I will get these caps and test it out When i get some coin next.

I will also let you know how it goes.

Best Regards
Jake...

Re: Hanns-G HG281D

I shall look for these capacitors in maplin electronics maybe they have them there! for the psu, and the 2 for the main board ill get the ratings of them. FM/FR Series capacitors throughout i take it? mainboard and psu

Re: Hanns-G HG281D

Many Appologies for not noticing whats been going on in previous posts! Been kinda rushed to get this monitor open. Being low on cash and not being in work i struggle to keep the monitor on on times.

The monitor seems to work and the power {blue light} stays on when there is no picture! {when the backlight goes off}. the back light does flicker on and off fast sometimes between on and off it takes sometimes 2-5 seconds other times within half a second.

When i first powered on the monitor I heard a Buzzing noise come from the power...

Re: Hanns-G HG281D



Was this with the same model? was it the smaller of the caps you replaced or just ALL of them for the power supply...

I am experiencing a problem with my Hanns-g Monitor and before I delve into opening it I would like to know what i should be looking for other than bulging caps.

Basically The monitors backight turns onand off it appears as I cant see nothing. Everything else works fine however i do notice that it flickers alot depending on what screen Resoloution its set at, the lower the less flicker the higher the more flicker sometimes its stable for ages then flickers and gets worse

At present its flickering quite a bit and going from 1920x1200 to 800x600 causes it to stay on...

I am experiencing a problem with my Hanns-g Monitor and before I delve into opening it I would like to know what i should be looking for other than bulging caps.

Basically The monitors backight turns onand off it appears as I cant see nothing. Everything else works fine however i do notice that it flickers alot depending on what screen Resoloution its set at, the lower the less flicker the higher the more flicker sometimes its stable for ages then flickers and gets worse

At present its flickering quite a bit and going from 1920x1200 to 800x600 causes it to stay on...