Re: Foxconn M7PMX-S LGA775
Thanks for the reply. I've got an order in for some caps and hopefully this is the last recap for this motherboard.
Peanuckle
Tinkerer
Last Activity: 05-28-2014, 06:45 PM
Joined: 11-13-2012
Location: Cincinnati, Ohio
-
Re: Foxconn M7PMX-S LGA775
We're baaack. The VRM caps are still holding strong but now it's the 3 circled in purple that are a problem.
OST RLX 0748
1000uf 6.3v
OST RLX 0803
1000uf 6.3v
Any recommendations for replacements?...Leave a comment:
-
Re: Foxconn M7PMX-S LGA775
I replaced all 8 of the NCC caps around the CPU, re-overclocked to my previous values (might try to push it further) and have run stress tests. So far so good!
I used a 20/40W Radioshack soldering station @40W and tinned with their 62/36/2 silver bearing solder... the factory solder didn't want to melt. Retinned with some 60/40 and perhaps a little more patience, and all went well.
Thanks again for the responses and thank you for having this forum.Leave a comment:
-
Re: Foxconn M7PMX-S LGA775
Thank you all for the input. I've put an order in for some of Sanyo 560uf 4v polys and will report back after the recap.Leave a comment:
-
Foxconn M7PMX-S LGA775
3/5 of these NCC 680uf 4v TMV caps are bulging (circled in gold). The system is overclocked and has been running 24/7 for 3 years. No obvious issues but I'd like to replace them anyways.
Is this the VRM and if yes would the OSCON 560uF 4v 8mm Polymer Capacitors from the badcaps shop be a good replacement?
Taking any recommendations for replacements. Thank you for your time!...Last edited by Peanuckle; 11-13-2012, 04:16 PM. -
Re: New Members - please post your introductions here
Hello! I've lurked for a couple years having come across this site when a cap popped in an old LCD monitor. Now I've noticed a few bad caps on my mobo and plan on tackling that soon so you can expect a new thread in the coming days. Thanks for existing!Leave a comment:
No activity results to display
Leave a comment: