$$$$$$$$$$$$$$$$$
Thanks for the reply. I have now measured and ohm and diode mode measurements are ok. Please see attached pic. I think i should follow why the gate voltage is so low. As you mention, the gate should be higher...

Here are som measurements...

Hi all,
Im trying troubleshoot a Lenovo E15 which is not turning on.
Charging Led is ON when charger plugged in.
PC doesnt turn on when pressing on button.
Sometimes on button blink 3 times and shut off and repeat it sometime again.

I took the motherboard out , and connected my in-line dc-meter and it shows 20.16V and 0.00A which for me sounds correct as there are nothing connected , not even battery.

With everything connected to the motherboard, in-line-dc-meter shows 20.09V and current consumption of 2.1Amps.

In-line dc-meter...