Re: Samsung LN32C540F2D NO Power No Red Light

Understood, I'll look for the correct part. Thanks for your help

Re: Samsung LN32C540F2D NO Power No Red Light

So if I look for the 550 series part would I need to find a CN05 version for it also? I like the idea of the added inputs. I've looked up the BN96-16368A on SJ but its out of stock. Ebay didn't have any listing either.

Re: Samsung LN32C540F2D NO Power No Red Light

version is cn05, the full model number is LN32C540F2D. Thanks

Re: Samsung LN32C540F2D NO Power No Red Light

Sorry to hijack this thread but I have this model, the LN32c540. I ordered a main board off ebay for a 550 series. [url]http://www.ebay.com/itm/110893864063?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649[/url] but the ribbon cable is larger than the zif connector on the board. Where did I goof up?

Thanks
DustyRe: Samsung LN32C540F2D NO Power No ...97.l2649[/url]

Re: Panasonic TH-42PX80U

I'll check that, this model only has the one input board.

Thanks for the help

Re: Panasonic TH-42PX80U

It is on, no error code. It will stay on constant. In fact I have to hold the power button down to turn the unit off. Then it starts a power cycle. Finally I have to remove the power cord from the back of the unit.

I have a TH-42PX80U, it shows no picture, no sound and does not respond to the remote control. I confirmed the remote is outputting a signal by looking at it thru the camera on my phone. When I plug in the set, I hear a triple click from the relays and can see the red light from the toslink port. When the power button is pressed the panel comes on, I'm guessing the back light works. I've taken the back off, both the SS and SC have green leds that illuminate. Last night I unplugged both the power and control wires for the SS board. When I did this the tv would no longer turn on. Does this mean...