Re: Magnovox 32MD359B LCD TV - White screen only

Yep, I actually just ordered that board earlier today. I love shopjimmy for their good prices. I don't know if it will fix the issue, but if that board was the problem, I would assume it would.

When it comes in and I reassemble the TV with the new board, I'll let ya'll know how it turned out.

Up til now, thank you.

EDIT: Just in the instance that this works out fine, I ordered a female VGA jack to solder to the board where a socket to solder it to exists. Will it work just from connecting the...

Re: Magnovox 32MD359B LCD TV - White screen only

According to online resources, the board I took a picture of is in fact the T-CON board. Also, I am not home at this current time and will not be home for another 4 hours. If there is anything to request picture-wise from now til I get home, let me know so I can add it to the to-take-picture-of list.

Re: Magnovox 32MD359B LCD TV - White screen only

The connector at the center left leads goes to one of the long skinny boards on the bottom side of the LCD panel. The other three connect directly to the power supply board. I don't know if that will help you any. Thank you for sticking with me on this.

And yes, Google is your friend, though I already exhausted Google trying to figure out what could be the "cause" of the problem I have.

Re: Magnovox 32MD359B LCD TV - White screen only

Well that is definitely true. Everything looked exactly the same between the other thread's and mine, but then again, I couldn't see the T-COM board either.

Not I've attached a new image of what I hope is the T-COM board. If you could confirm that with me, I'd appreciate that. While I was sitting here, I looked furiously for something that looked like a fuse. I couldn't find anything marked with an F#### to indicate the fuse, but just a hunk ton of C####'s, R####'s, and a couple oddball ones like IC####. Replace "####"...

Re: Magnovox 32MD359B LCD TV - White screen only



Though the thread is 160+ posts long, the pictures requested are on the first page.

As for number of boards, I count 5, not including the built-in DVD drive.
1 power board, 1 inverter board, 2 very long and skinny boards that are on the immediate bottom which are cable bridged together and the T-CON board. Looking for the fuse now....

Re: Magnovox 32MD359B LCD TV - White screen only



Well I've yet to still find my camera, but here is another thread with the same exact TV with decent pictures. For now, I hope this helps. [url]https://www.badcaps.net/forum/showthread.php?t=22724[/url]

An another note, the only fuse in obvious site appears to be fine. That fuse is located on the power board. I haven't looked under the metal shield near the top center of the LCD panel for the fuse you are talking about.

Will be looking for that now. Thank you for your quick replies....

I have here the TV model posted as the title that I found at the side of the road. The TV turns on and comes to a blank white screen. I have no way of testing for sound as I do not know how to change the input to something with sound (say static on CATV or sound from HDMI input)

With the TV apart and on, you can hear a high voltage like noise coming from the inverter board. I don't know if that noise is normal as it is fairly noticeable if you are looking at the back while it is on.

There is a moderately gray border all the way around with rounded corners at the...