Re: Asus N56VM Rev2.3 740M Graphics
Thank you, First suggested bios ([url]https://www.alisaler.com/asus-n56vm-rev2-3-bios-bin/[/url]) worked for me on a model with a GT 630MRe: Asus N56VM Rev2.3 740M Graphics<...with a GT 630MRe: Asus N56VM Rev2.3 740M Graphics
Thank you, First suggested bios ([url]https://www.alisaler.com/asus-n56vm-rev2-3-bios-bin/[/url]) worked for me on a model with a GT 630M
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Macbook air 1466 820-00165-A SSD not detected
Hello.
Pins 1-5 of ssd conector show 0v.
L3700 is ok, (also 0V on both sides)
Some hints for where to check next, please.
TIA
-
Re: HP Spectre 14-cb101np Fix bios please
Thank you. With this i have feature byte back in bios. Sadly the vga, audio & shutdown problems remain. So there must be some other problem with the board.
Thank you all for your time....
Leave a comment:
-
Re: HP Spectre 14-cb101np Fix bios please
First, thanks for your help.
I've copied the memory regions (DMI 3C7000-3C70FF & KEYWIN 3C5000-3C503F) from my old bios to one pointed, and i have the same problem. (Can't install Intel vga driver, no audio & computer crash on shutdown). I see in bios screen that some info is missing,(feature byte, for ex.) can it be the source of my problems ?
TIA
Leave a comment:
-
HP Spectre 14-cb101np Fix bios please
Hi all
have a hp 14-cb101np with mb. DA0P9KMB6C1 rec C, that boots with black screen. Flashed a bios found on the forum and it boots, but without SSD flash detected.
Then flashed HP bios via winkey + B,and it now detects SSD, but windows crashes after intel vga driver install. Also no audio.
Can someone please have a look at my original bios, please ?
TIA
Nelson...
-
-
Re: Need help on a Asus x541uvk rev 2.0 board, please
Thank you for the guide.
So, if i'm getting the guide right, i have this :
DCIN/VCC: pin 28 - 19v, ok
ACIN/ACDET: pin 6 - 2.63v, ok
REGN/VDD: pin 24 - 6v, ok
CMSRC : pin 3 - 0v, (comes from source of first mosfet, that is not switching on, so OK ????)
ACOK: pin 5 - 0v (not OK, right ?)
ACDRV: pin 4 - 0v (not OK, should have 24v, right?)
Leave a comment:
-
Need help on a Asus x541uvk rev 2.0 board, please
Hi
Newbie here. Reading as much as i can.
I have this asus board with missing voltage on the gate's ac/in Mosfets, so it's "dead". From similar posts, gate's voltage should(?) come from BQ74780S, that i think is pu8091 on the boardview found in the forum.
1 - 0v
2 - 0v
3 - 0v
4 - 0v
5 - 0v
6 - 2.63v
7 - 0v
8 - 0v
9 - 0v
10 - 0v
11 - 0v
12 - 0v
13 - 0v
14 - 0v
15 - 0v
16 - 0v
17 - 0v
18 - 0.05v ????
19 - 0.15v
...
-
Re: PLS I need asus X550C BIOS
This one worked for me.
Many thanks...
Leave a comment:
-
Re: l50-b-2dj no image
Sir, you are my hero. Laptop now boots fine.
Leave a comment:
-
l50-b-2dj no image
Hello all, sorry for the long text, but i'm trying to describe it the best i can.
I've a Toshiba l50-b-2dj (board dablidmb8e0 rev:e) with the following fault : turns on, backlight on, no image, keyboard works, hdd spins and loads windows. After a minute or two, turns off. After using intel easy clean me on the bios, machine would have the same symptoms, but instead of shutting down, windows login screen would come up, and machine worked fine. Intel and Amd vga were detected and no question marks in device manager. Machine was working fine, across several reboots, appart for the...
-
Re: Dump bios Asus X507U
Greetings from Portugal. Worked to recover from a forgotten bios password
Leave a comment:
-
Re: Need some help to identify some resistors in a 15" 2011 MacBook pro
Hello.
Thank you very much and sorry for not beeing more specific. You are correct about the model, it's that one.
The damn things are so small that i've lost track off them. I'll just scrap them from a dead laptop board.
I'm just curious about one thing. Prior to asking for help, google led me to some board view files, but that doesn't show it's values. Are the files that i've found incomplete or are there other files that show's it ?
Once again, a...
Leave a comment:
-
Need some help to identify some resistors in a 15" 2011 MacBook pro
Hello everyone.
I've screwed my mac. After the ati gpu failed, i've done the uefi var trick & resistor removal from realmacmods and everything was working fine, apart from the no backlight after suspend.
By stupidity i decided to do the last part, shorting the cap and the resistor, near the backlight controller. That was a mistake. I have a condition that makes my hands shake like hell when i'm tired or nervous, so you can guess what happened : i've knocked out a couple of resistors.
Can someone please tell me the values of the resistors pointed...
-
Toshiba L50-B-2FT Bios
Hello. Greetings from Portugal. Sorry for the long post
I'm having a fight with one of these L50.
Board : DABLIDMB8E0, rev e. Bios in a 25B64B. Part no psktne-02v011ep
Inicial condition : machine powers up fine, fan spins a couple of seconds, but doesn't boot. No keyboard. Turns down fine with power button.
Thinking of a bios problem, tried a couple of bios dumps from the forum. One of them gave keyboard activity and turned the screen on (but blank).~
Went back to my original bios dump, and cleaned it with "Intel Easy Clean...
-
Re: New Members - please post your introductions here
Hello,
Long time user, but now i'm looking for help.
TIA
Leave a comment:
No activity results to display
Show More
Leave a comment: