Re: Copper Coil??
This regulator I'm not sure about. I can't find a datasheet on it.
It also feels out, but I'm not sure if that's normal.
RGV - line 1
2693 - line 2
tab = 1.08
(from left to right if tab is facing north)
1. 0.03
2. 1.02
3. 5.02
Readings with HD or without HD plugged up....
xoverdrive
Member
Last Activity: 05-25-2013, 08:21 PM
Joined: 10-16-2012
Location: murfreesboro, tennessee
-
Re: Copper Coil??
I got it back together now.
It powers up and that's it.
I have removed the HD and plugged it into a computer and it worked.
It's getting the proper voltage from the power supply and to the HD.
Only thing I noticed is when the HD is plugged in, the green light is very dim and blinks every now and then. It's getting .77v. And 2.00v when HD is not plugged up....Leave a comment:
-
Copper Coil??
I need help identifying this piece.
It came out of an old seagate external. 9BD862-560.
It reads .5 ohms.
And it seems to make noise and get hot.
There's no label on the part.... -
Re: Panasonic TC-P50G15
Well, I think my adventure is done for now.
everywhere I look the D board is out of stock. Thanks for your time.
Leave a comment:
-
Re: Panasonic TC-P50G15
Originally I had 7 blinking red lights. I isolated most boards such as, SS,SC,SU,SD and discovered that the SD board was the cause of the 7 blinking lights. Replaced that and TV turns on but with all that crap on the screen. Hope that might help.Leave a comment:
-
Re: Panasonic TC-P50G15
Yea I got it from a buddy of mine who said I could have it if I fixed it.
I just replaced the SU board back with the original and still same picture on screen. Is there a way to test the A board?Leave a comment:
-
Re: Panasonic TC-P50G15
Well, thru my dumbness I replaced the SU already as well. Bc I thought that was the cause at first. So the D board or buffer boards?Leave a comment:
-
Panasonic TC-P50G15
Ok, so I finally figured out that is was the SD board that was giving me the 7 blinking lights. I got a new one and installed it and now I get this on my display?? Could this mean my panel is bad or something? Or something else I can look for causing it??... -
Re: Panasonic TC-P50G15 7 lights
Yes, sorry about confusion.
1. Everything connected I get 7 blinking red lights.
2. With the SC board disconnected from P board and from the SS board, I get 6 blinking lights.
3. With the SC board connected and the SD board disconnected from SU and SC with the jumper wire on sc50 I get solid red light and a long beeping noise.
4. Then pretty much reverse step 3, with the SU board disconnected from SD and SC with the jumper wire on sc50 I get 7 blinking red lights.
This is...Leave a comment:
-
Panasonic TC-P50G15 7 lights
I have a Panasonic TC-P50G15 plasma television and it's giving me 7 blinking lights. I have tried isolating the boards. When disconnecting the SC board I get 6 blinking lights. Then I isolated the SD board it gives me a solid red light and a long humming beeping noise. The SC board when isolated just gives me the 7 lights again. So, what does the loud humming beeping noise mean?
No activity results to display
Leave a comment: