Re: Hanns-G HG281D, LCD Monitor no power

With regard to my above post, it was only 6 caps changed out

Re: Hanns-G HG281D, LCD Monitor no power

Hi, I came across this thread when I had a problem with my HG281D and thought I'd post my experience for future users.

I had the same problem as the OP. After switching the display off for the 1st time in about 3 years. No response from the switch and no blue or orange LED. Measured the 5VSB and found it to be fluctuating between 4.2V and 4.9V with the PSU not connected to anything. I dont have the kit to test the caps so replaced all 7 around the small tansformers that seems to derive the SB voltage. Now 5VSB rock solid and...