Hi All
I saw many posts of this monitor, but none with my problem.
I was happily working on the comp with word andmy disply just Died.
Green light constant, no smoke, no noise, no backlight, NADA, just dead .
As I have Noooo idea wher to start I beg your patience.
Have removed the board (photo included) and will do all the joints first,
Have checked the diodes on the board and the all look fine.
No swollen Caps (Su' scon)
Nothing seems or smell burnt.
Fused Ok of couse
Please advise me where to look
...

Hi all
Here is a good one for all the BRAINY people on this forum.
Is there a simple way ie. connecting ONLY a capacitor across mains that will help to stabilize very short dips.
I ask this because we operate a pressure pump system at the lodge and our power here in Mozambique is very iffy with regular point something second dips.
Being in the middle of Africa I thought I could use a RUN cap from a motor to help.

ANY IDEAS PLEASE
Regards
to all
my email is [email]smithjollyroger@gmail.com[/email]Hi all
Here is a...

Hi All
Have just replaced the Caps and Triac on this machine,
I now have the problem that if I lay the machine on its side the speed is fine, but, when I stand it vertically the speed goes wonky.
I have a fair amount of lateral play on the motor, could this be affecting the speed control, governor, I have looked for a parts layout on the web to see if I could use washwers to stabilise the shaft but alas can find none, ANY IDEAS anyone ANY help will be appreciated
Regards to all

Re: Fix for Benq FP737s 17" (Q7T3)

Hi All
New guy from Mozambique,
MAN! I wish I had a Pinch of the Knowlwdge floating around this forum, Good going Guys.
I have a Benq Q7T3 which has been good for years, now it has died a quiet death.
No lights no nothing, have done a cursory test of trannies and such, resoldered all joints, did not remove solder just resoldered and nothing happens.
I am a hobbyest and don't know much, am also 1000Km from civilization and batle to get spares quickly, have to wait till I go go to South Africa...