Re: westinghouse vr3215

UPDATE:

The transformer that supplies both 12v and 24v has no output, and also no input.

The other transformer has a 390v Input, so I'm assuming this one should be getting the same???

Any help would be great!

Re: westinghouse vr3215



I am having the same voltages as above.
I seem to have lost 12v and 24v supply.

I want to see if I can figure out the issue before I spend the money on a new power supply.

I have tested the voltage on the large cap, and I get about 393v.

I have tested all the diodes, and all seems good, except one is acting like a zener diode, and I'm not sure if it is a zener diode or not. Location: JM8

I haven't tested any of the caps yet, but I have a feeling it's not a cap issue. Plus my...

Re: New Members - please post your introductions here

Hi, My name is Sean.

I signed up because I'm interested in learning about Failing Capacitors, as I've seen a lot of device failures related to failed capacitors.

I probably won't post much, but if you see me around, at least you'll know who I am!