Re: Insignia NS-32LCD (clarification on other post's solutions)

Ok, sorry I saw the link but kept reading, then replyed forgetting about the link. I appreciate your help. I watched the video and now feel a little more comfortable about fixing this board.

Re: Insignia NS-32LCD (clarification on other post's solutions)

Also as far as the replacement capacitors I know to get a better quality manufacturer, keep the same farads, but do I keep the same voltage as well?

Re: Insignia NS-32LCD (clarification on other post's solutions)

Thank you for responding. I'll take a closer look at the last board. I didn't pay too much attention to it. All my focus has been on the power supply. I figured I needed to replace the three capacitors. Do you think I should go ahead and replace all capacitors on the power board while I'm replacing the three? I read a little about discharging a capacitor but when doing it with a resistor does it matter which side I touch first. (positive side or negative side)?

I have read every post on the internet about the Insignia tv's having no picture but having sound issues. I just need some clarification on exactly which solution to try because I think I overloaded myself with all the information I found.

Ok, my problem is that my Insignia NS-32LCD tv started having problems turning on. It would turn on and have sound but it would take any where from a couple seconds to minutes for the picture to come on. Now the picture won't come on at all. I do a little schooling behind me in electronics so I automatically assumed bad capacitors. I opened it...