Thank you! I desoldered it however the video was a little outdated in my opinion so I found this one which helped me more, and might help someone else as well in the future: [url]https://www.youtube.com/watch?v=z9uLPo9QAY8[/url]
I was able to read the chip (it ID'd it automatically without me finding it manually) and have attached the old bios in this reply. As a last request, I would be grateful if someone could transfer my DMI info, thank you again!https://Thank you! I desoldered it h...t help someone...

Hello, since my last post I bought a CH341a Mini-Programmer from Ali-Express and I just now tried to read the old bios from it, however whenever I try to read, it gives back FFFF values, or ID Unknown Error (see screenshot). I read up a bit on this and after making sure that the clamp pins are correctly contacting the bios chip and after trying with every driver I found, I stumbled upon a video where the guy says that these values mean the bios chip is completely empty and there is no old bios on it. Any tips on how I should proceed?...

Hi,

As the rest of you here, I'm getting no screen output, caps and Fn-lock led's working and power button led flickering. Holding bios recovery button or novo button (small hole next to power led) results in two short beeps and nothing else.

Lenovo Ideapad 3 15ALC6
MO: PF9XB2326036
MTM: 82KU0075RM
S/N: PF3LD616
Chip: Winbond 74M12JWSIQ 2204

HS461&HS561&HS761 NM-D521
2021-10-26 Rev 3.0

Don't have access to old bios, and I don't know my way around hex editors so I would be grateful if someone could copy...