Re: Old school Daewoo DTS-42 Plasma clicks to standby after a few seconds
Ty!
speciess
New Member
Last Activity: 08-04-2016, 03:18 PM
Joined: 08-30-2012
Location: almeria
-
Re: Old school Daewoo DTS-42 Plasma clicks to standby after a few seconds
Thanks for yours advice,i will try this tonight also i will try with reballing machine...if nothing work i give this for death.
Have a nice day!
Ahh,this IPM is coming encapsulated with no access to the components?or the heat sink can be riped away ?...Leave a comment:
-
Re: Old school Daewoo DTS-42 Plasma clicks to standby after a few seconds
no human hand can take this piece of shit out...have a large radiator
which absorb all the heat...the air station will not do the job and my reflow oven is smaller than board.pfuuu
...
Leave a comment:
-
Re: Old school Daewoo DTS-42 Plasma clicks to standby after a few seconds
im on that but they seems the solder used its Sn&Ag so im affraid to desolder that because i can harn some components from igbt
.the buffer boards isnt tested because the tv is not in my home...i will do that tommorow...
Last edited by speciess; 02-24-2016, 04:21 PM.Leave a comment:
-
Re: Old school Daewoo DTS-42 Plasma clicks to standby after a few seconds
Any solution here?i have the same problem with same Tv,psu checked and good,stay on when the sustain board disconnected...no visual issues on sustain board and all the checkable components checked and good.any ideea?thank you in advance!Leave a comment:
No activity results to display
Leave a comment: