kukasIII
Member
Last Activity: 03-28-2025, 06:09 PM
Joined: 08-29-2012
Location: portugal
-
hi to all, just say thanks for the dumps.. another win sucess (used [B][URL="https://www.badcaps.net/member/125456-malangg"]malangg[/URL][/B], file)hi to all, just say thanks for the dumps.. another win sucess (used [B][URL="https://www.badcaps.net/member/125456-malangg"]malangg[/URL][/B], file)hi to all, just say thanks for the dumps.. another win sucess (used [B][URL="https://www.badcaps.net/member/125456-malangg"]malangg[/URL][/B], file) -
Re: Graphics card Schematics and Boardviews
gracias, obrigado , thanks ...kkkkk
and to the rest to
from Pt
cheers
Pedro...Last edited by kukasIII; 09-19-2023, 06:23 AM.Leave a comment:
-
Re: Altec PC410 (BGA Rework) to communicate with PC
hello to all, well after some time my altec stop 232rs connection.. try everything. adapters 340, pl2302.... etc.. and fck nothing.. altec became deaf.
so lets go inside.. RX is arriving at cpu, after the max232 and optocoupler, good signal in osciloscope, but nothing!!! he does never accept income data. rebuild the rs232 new max232ene+, new coupler, check cond.. all good but no comunication.
.....
so i have in "bag ttl-usb" lets go direct to cpu .. and fck ... voila...
...
Leave a comment:
-
Re: ASUS X99-A, usual 00 code, ME voltage 1.4 instead of 1.05 ...
hello people , well.... another, in here in the same isue, 1.65v 
in pch arghhh kill the pch my board x99 deluxe/u3.1.
thanks guys, i did direct to check voltage.
systems start, q-code run for 9 number, last one is 30 them 00 and shuts down.
pch hot.
now thinking if i will get the trouble to buy a new one and replace ( 40€)
...
Leave a comment:
-
Re: msi ms-16w11 ver:1.1 need schematic
thanks for the share Karemkf
Leave a comment:
-
Re: Asus X55c bios dump need
guys you rock..
thanks 1000 times
Leave a comment:
-
Re: asus x55vd rev 2.2 schematic needed
thanks to all for the sharing
Leave a comment:
-
Re: Samsung mini n145plus
a big thanks to kotnatan ... bios file ok
Leave a comment:
-
Re: Samsung NP300E5C bios dump needed
update ----
this bios is for np300e5x and not for np300e5c, there are some difference, missing secure boot. i will post the correct one.
the machine still work and post with this one, but i prefer to load the correct one.
Marca -samsung
Modelo -NP300E5C
Board -Scala3-15/17CRV
Bios -P03RAQ
[url]https://www.badcaps.net/forum/attachment.php?attachmentid=90161&stc=1&d=1405354294[/url]Re: Samsung NP300E5C bios dump neede...<br /> <br />...Leave a comment:
-
Re: Samsung NP300E5C bios dump needed
thanks i will test, my machine have that famous bios brick from this machines.
stuck in bios logo loop.
...
Leave a comment:
-
Re: New Members - please post your introductions here
hello to all..
hope that i to can help, because i was help in here, ideas post technical and so on..
pedro
from portugalLeave a comment:
No activity results to display
Leave a comment: