Thank you. This worked.
Flashed the BIOS. No more splash screen and no BIOS password.
I really appreciate the assistance of you both!...
DewHead
Member
Last Activity: 04-11-2025, 01:47 AM
Joined: 02-10-2025
Location: Beer sheva
-
Thank you [USER="237374"]SMDFlea[/USER].
I'm pretty new to this. Is the EC firmware programmed onto the winbond chip I got the smaller dump from?SMDFleaThank you [USER="237374"]SMDFlea[/USER].
I'm pretty new to this. Is the EC firmware programmed onto the winbond chip I got the smaller dump from?...Leave a comment:
-
peste[USER="201805"]peste[/USER] is there anything else we can try here?Leave a comment:
-
Flashed successfully, but password and boot splash screen still present.
Computer does boot fine.
Did the dump I provide look like it's the right BIOS dump?...Leave a comment:
-
I'll give that a try and update. Thank you!
Thinking about it, the original dump file is probably big due to the boot splash-screen image. Hadn't thought of that earlier.Leave a comment:
-
Getac F110 G4 bios request
Device: Windows tablet
Brand: Getac
Model: F110G4 (52628887XXXX)
Board number: TF1-YH-PCB ; PWA-F110G4
Serial number: RJ803F0624
Request: password and boot image removal
Problem: bios locked with password and annoying boot image
CPU: i5
I can get a dump of the BIOS if only I could find it.
On other F110(G3, G2) threads I see that the dump size is around 8-9MB. The dump I got off of the winbond chip is ~1mb and another dump off of an MX chip is ~16MB.
Attached both just in case. Also a picture of the board itself.
I'd... -
Thank you for the quick turnaround!
Unfortunately it doesn't seem like a frozen BIOS issue.
Flashed it but still same behavior. I'll keep digging....Leave a comment:
-
Latitude 5421
S/T: J9LT0J3
I suspect I have a corrupted BIOS.
Laptop turns on. Keyboard light turns on. No POST. CPU gets hot which turns fans on. No display, not even backlight.
Built-in screen test runs.
Tried pulling BIOS battery and all the button pushing combinations online to no avail.
Attached is the BIOS dump.
I'd appreciate the help of the forum to get a repaired .bin to try.
Thank you thank you...Leave a comment:
-
Thank you so much for this!
I was able to open the file with BoardViewer....Leave a comment:
No activity results to display
Leave a comment: