I have a question for you, the picture is working on the TV, but it crashes when loading the android. I found that the +3.3-NT controlled via Q4101 turns off and that is controlled by +1V1-NT-OK. The control voltage is released by U4103 controlled by BE-PWR-EN. What could be the reason that U4103 stops sending +1V1-NT-OK during loading?
I have 3.3V on BE-PWR-EN and then it disappears, I think that is the reason
kozejk555
Member
Last Activity: 01-27-2025, 04:50 AM
Joined: 01-23-2025
Location: tabor
-
I converted the usb drive to MBR and then formatted it to FAT32. I put NVM.eed on the disk but the tv does not boot. The red diode is flashing and I have no picture. If there is NVM.BIN on the disk, the image starts, 4 green LEDs light up on the mainboard, and in the process of loading, when the colored balls move, it falls and starts loading again. I don't know where the error could be. But thank you very much for your help.
[ATTACH=JSON]{"data-align":"none","data-size":"full","title":"dataurl451988.png","data-attachmenti...Leave a comment:
-
so should I format the usb disk to MBR format and insert it into the TV and not copy anything to the usb?Leave a comment:
-
thanks but it doesn't work. However, the image is always restarted when loading when the colored balls are moving. It looks like it won't just be an error in the oled. I will still try to install the latest firmware and apply NVM to it.Leave a comment:
-
I have NVM.BIN and TPM171E_107.1.143.0 firmware loaded on usb. If I leave the USB in the TV, the firmware is constantly updated, even for an hour. If I remove the USB, the TV turns off and indicates an error. I don't know how to continue....Leave a comment:
-
Bro, my type of tv is TMP18.1ELA your firmware is for TMP17. Do you have for my type?...Leave a comment:
-
how long does the upgrade process take? It's been running for me for 20 minutesLeave a comment:
-
sorry I´m idiot. I got itLeave a comment:
-
there is only autorun.upg. I must rename this autorun.upg on uprage_loader..pkg???Leave a comment:
-
i downloaded autorun.upg version 107.1.143.0 and the TV won't update. Only PKG files seem to work. I don't know where the problem is. I am also sending the log...Leave a comment:
-
So NVM helped temporarily. Now I have an image, and the TV starts to load. However, it always crashes, and the process repeats. When I remove the USB, I lose the image again.Leave a comment:
-
Thank you I find NVM for my TV. I have to rename file?Leave a comment:
-
Hi
I need NVM for 55oled803, can you halp me?Leave a comment:
No activity results to display
Leave a comment: