Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Thank you! The password has been reset.​...
-
-
I recorded your dump into the chip again, but when I turn it on, the message appears: "The BIOS has recovered its identity data from the Embedded Controller due to data mismatch." Help please.
Leave a comment:
-
I recorded your dump into a new chip. I did not select the EC reset when starting the laptop. F10 still prompts for a password. Do I need to desolder and re-record the dump again?
Leave a comment:
-
Hello.
Please help me remove the BIOS password. I want to connect an eGPU to Thunderbolt, but I can't disable the integrated graphics. Thank you.
Elitebook 650 G10
SN# 5CD3439CS6
ProdID 736V1AV
DA0X8TMB6E0 REV: E...
Leave a comment:
-
Thank you all!
The 10 kOhm resistor came up.
I couldn't find the connection diagram.​
Leave a comment:
-
Laptop turns on with adapter only, not recognize the battery. There is no voltage on the battery contacts (black, red wires). I disconnected the battery for replacement RAM. The level of wear was​ 23% AIDA64. Please tell me what else I can check?
Leave a comment:
-
There are 3,3v on the resistor contacts, the charger is connected.
[ATTACH=JSON]{"data-align":"none","data-size":"full","title":"010.jpg","data-attachmentid":3554092}[/ATTACH]...
Leave a comment:
-
I tried a 1 kOhm resistor right before writing, but it didn't change anything. There is no voltage. Everything was working fine until I accidentally damaged the resistor with a screwdriver while connecting the battery.
Leave a comment:
-
HP Probook 445 G9 (DAX9SFMB8AO REV:A)
[ATTACH=JSON]{"alt":"Click image for larger version Name:\t4455.jpg Views:\t0 Size:\t177.3 KB ID:\t3553432","data-align":"none","data-attachmentid":"3553432","data-size":"full","title":"4455.jpg"}[/ATTACH]
Hello.
The laptop does not recognize the battery. A component is missing on the board. Could you please tell me the type and value of the component, or share the schematic?
Thanks.
Kind regards.​...
No activity results to display
Show More
Leave a comment: