Re: Vizio e320vl stuck on vizio logo
This is about as clear as it can get, because all I have is the stock lens which isn't very good....
cheezeitz51
Member
Last Activity: 08-27-2012, 05:40 PM
Joined: 08-17-2012
Location: Erie, PA
-
Re: Vizio e320vl stuck on vizio logo
Some did, and some didn'tLeave a comment:
-
Re: Vizio e320vl stuck on vizio logo
That's about as clean as I could get it, although I only had 70%....Leave a comment:
-
Re: Vizio e320vl stuck on vizio logo
Okay, but don't make fun of my horrid job.
...
Leave a comment:
-
Re: Vizio e320vl stuck on vizio logo
The logo doesn't change now even. I completely ruined the board though. I managed to make some of the little metal things on the board fall off so there's no way to attach the u18 thing, so I think all I can do now is get a new board.Leave a comment:
-
Re: Vizio e320vl stuck on vizio logo
Uhm well the whole resoldering thing didn't go so well, so now it wont turn on at all. Woops. I suppose the main board needs replaced now.Last edited by cheezeitz51; 08-18-2012, 01:26 PM.Leave a comment:
-
Re: Vizio e320vl stuck on vizio logo
I can't do the first thing because I can't get to the menu. Resetting it didn't work either. When checking voltages on the main board what exactly am I looking for? I'll try re soldering it though.Leave a comment:
-
Vizio e320vl stuck on vizio logo
I got this TV from someone who said it had this problem, and that it was just sitting around. I plugged it in and it worked fine, and so it sat there for a few weeks. Then I went to use it again and it worked a few times. Then it broke again. It turns on and it's just stuck there with the vizio logo. The power button doesn't do anything, and it has to be unplugged. So I would assume that it's a problem with the main board, but I don't see any bad caps or burnt things or anything bad. I attached a picture of it. So what should I do now?...
No activity results to display
Leave a comment: