Why are you using my post for your issues?...

Hello everyone!
I just acquired a Sharp Aquos for free.
When I plug it in, it will try to power on, but it fails.
The "error code" is 1 long flash, then 1 short flash, which suggests it is a lamp error code, according to the manuals.
I did a bit of research and did what I found could be the possible issues;
I removed the back panel, checked for continuity on both fuses where the power cable connects, and I get somewhere around 0.05. That should be good.
I also tested the leads going into the psu board from the wall connector; I get 120V.
I disconnected...

Just a guy trying his best to repair stuff instead of throwing it in the garbage.
very novice at electronic stuff.