Re: Philips 32PFL9603
Hi.
I attached new pictures with more resolution....
polino
New Member
Last Activity: 06-02-2017, 12:24 PM
Joined: 08-04-2012
Location: Barcelona
-
Re: Philips 32PFL9603
selldoor:
The voltage on big cap is 400V when I plug it and then entering protection begins to fall until it reaches 0 volts.
If I press the power button nothing happends.
About the 3 grey resistors I mesured it and are ok.Leave a comment:
-
Re: Philips 32PFL9603
Hi.
t.j. No, no one have open it before.
budm: I attached the back side (I've scanned it), the top side I send it as soon I get a high resolution camera.
Thanks again....Leave a comment:
-
Re: Philips 32PFL9603
Obviously, it's the same but I have it out for testing.Leave a comment:
-
Re: Philips 32PFL9603
Hello.
This is the original, but I put another new identical and the problem persisted.Leave a comment:
-
Re: Philips 32PFL9603
Yes, I tried with all connected and the trouble continue.
I think the problem is in the PSU, but I can't find it.Leave a comment:
-
Re: Philips 32PFL9603
Hi.
selldoor according the service manual three blikns means 12V supply.
I tried to messure the voltage and before swiching the protection it apperars but after obviously it isn't.
pymic my PSU isn't exactily like yours.
I attached images, sorry for the quality, I have no camera with higher resolution...Leave a comment:
-
Re: Philips 32PFL9603
Hello selldoor.
Thanks for the link.
I changed a couple of capacitors suspects but the thing remains the same.
The relay switch is activated and then activates the relay protection.
Any idea what might be going?Leave a comment:
-
Philips 32PFL9603
Hi.
I have a Philips 32PFL9603 with backlight.
When I plug the Tv LED blink three times and nothing occurs.
I looked for the service manual but I can't find it.
The PSU model is DPS-230MP A.
Capacitors its seem ok visually.
May be capacitors but they are well?
Thanks
No activity results to display
Leave a comment: