Re: MSI MS7501 replacement caps.

Hi hegge, man, this is a cool site !! Thanks for your help, I like what you do with bad caps & batts. It beats filling a can with nat, gas & lighting the gas escaping from the hole in the top.

Re: MSI MS7501 replacement caps.

Hi again, regards the 1000uf 16v caps. Mariushm suggested the Nichicon HM 10 x 16mm. I have just looked @ badcaps online store they only have HZ 10 x 16mm & HN 8 x 20mm. Which would be the ones to order, I have room for either 8mm or 10mm.
thanks for you help & time

Re: MSI MS7501 replacement caps.

Hi, I have just found some KZGs 1000uf 6.3v 8 x 14mm. Space is tight so they have to be 8mm. What should I replace them with. Hope you can help.

Re: MSI MS7501 replacement caps.

Hi Mariushm, thank you so much for the very fast reply..amazing !!. I will take your suggestions & order from Digikey. Even though I have repaired & built sound equipment since the 60s this is my first mobo repair. With your help & expertise I hope I will find it a satisfying pleasure. Once again, thank you for your fast & precise response.

Hi, my name is Derek & I am based in London UK. I have a MSI MS7501 v 2.1 mobo. ( oem MEDION pc mb ). 3 caps have bulged due to overheating, marked with red x. Should I replace all the 20 x 8 mm caps marked with coloured circles ?. All the caps are brown with manufacture mark TK (Toshin Kogyo ?).

5 x 1000uf 16v ATWB 802a 20 x 8 blue circle

5 x 1800uf 6.3v ATWB 733a 20 x 8 yellow circle

1 x 1800uf 6.3 ATWB 732a 20 x 8 green circle

Even though the yellow & green circled are the same values they have different numbers,...