Re: Soniq E40W13C-AU TV Stuck on standby

Hi I am Ranjit from Sydney. I wish to convey my sincere thanks to all especially BUDM for the advice regarding the volatage regulator ivBM1117Adj as my 48"Soniq was stuck into stand by. I was getting 5.1V at pin 3, 0.14 at pin 1 and 0.73V. at pin 2 which indicated that BM117 adj is damaged. I replaced it with LM117 adj which I bought from rs online and now the tv is working!!!!!!! Thanks to all again as this tv was first purchase of my daughter's first salary. All the best to all.

Re: Toshiba Satellite - Locks up when plugged in



Hello benmah
Thanks for the solution. I have taken out nec tokin 128 with screw driver n cleaned the contacts with 60 watt soldering gun. Waiting for caps 330uf 4v esr 0.012 ohms. Just wondering when I was cleaning the contacts surrounding PCB area became hot around 80 degrees but I cooled it after by blowing air is 80 degrees temp can be harmful to other parts offcourse I took out CPU and all other removable parts
Thanks
rkn8677...