Thank you lotas- This worked for me, too. A decent TV set has been saved from landfill. The picture that Rekap69 posted was exactly the same as my TV. I de-soldered the IC from the motherboard using lead solder & hot air at 286 degs C for one minute. I used a CH431A EPROM programmer to read and re-program the chip with the Neoprogrammer software. I installed the CH431A driver to make it run with Neoprogrammer. I didn't do the mod to the CH431A to limit the data lines to 3.2V. Some YouTube videos say it is required, but others do not. The first image file "UE32T5300AU dump 25q40.rar"...