Re: Gateway Nv3717u not posting
Anyone have a tip for getting the old solder on the motherboard to melt? It seems to not want to melt when the iron is applied
rda10002002
Member
Last Activity: 05-17-2014, 10:22 PM
Joined: 07-17-2012
Location: laurel
-
Re: Gateway Nv3717u not posting
Do you have a recommended way to desolder it easily?...Leave a comment:
-
Re: Gateway Nv3717u not posting
What is the best way for someone who has never done it to check and see if they are shorted...Leave a comment:
-
Re: Gateway Nv3717u not posting
So does anyone know of an easy way to remove and resolder smt parts?Leave a comment:
-
Re: Gateway Nv3717u not posting
I am looking to doing the reball myself, Does anyone have any good heating profiles for this kind of chip?Leave a comment:
-
Re: Gateway Nv3717u not posting
You can buy the chip pre-balled? Where would I do that at?...Leave a comment:
-
Re: Gateway Nv3717u not posting
Still not having any luck finding out what size solderballs to use on the gpu. Do anyone know what size is needed? And a good place to order themLeave a comment:
-
Re: Gateway Nv3717u not posting
So does anyone know what size solder balls to use for this chip for a reball?Leave a comment:
-
Re: Gateway Nv3717u not posting
Do you know of a good way for me to fix it from home. With out having to spend a lot of sending it to have the chip reballed?...Leave a comment:
-
Re: Gateway Nv3717u not posting
So I was testing some of the led light bars, and found out the touch media bar that allows for the volume to be muted or turned up and down will still work. seems like it may be the vga chip. Anyone know of an easy way to replace the chip on a DIY level?Leave a comment:
-
Re: Gateway Nv3717u not posting
I figured it may have been the gpu chip, just have to find an easy way to remove itLeave a comment:
-
Re: Gateway Nv3717u not posting
Is there a way to try to reflash the bios with out getting anything on the screen to see if that may be it?Leave a comment:
-
Re: Gateway Nv3717u not posting
Wow, lots of stuff I don't understand there..lolLeave a comment:
-
Re: Gateway Nv3717u not posting
This is the motherboard in question. The part in red looks like its damaged. Not to sure if this is leading to my issues...Leave a comment:
-
Re: Gateway Nv3717u not posting
I have tried a combo of 4 different ram sticks and I have tried a reflow on the gpu. It is the same no matter what socket the ram is inLeave a comment:
-
Re: Motherboard schematics archive?
Anyone have a schematic for a gateway NV7317u?Leave a comment:
-
Re: Gateway Nv3717u not posting
Nothing will display on the screen and no beeps are heard as if it was getting to post. And the reflow is the first step i tried and it is still giving the same issues. Anyone know if there is a listing of the chips and the placement for this board?Leave a comment:
-
Gateway Nv3717u not posting
I have a Gateway NV7317u that will not past post. It gives a blank screen and no external screen will work. The power light will light up and the HDD will spin up and stay spinning. But the fan will start then stop after a few seconds. The light on the power supply says a green light. I have the motherboard out and did not see any damage. Anyone have any ideas on how to fix or listing of chips on the motherboard that may go bad? -
Re: Magnavox 19md357b REPAIRED!!!
Ok i am compleatly new to this and i need to replace the caps on my board. When i go to order the Caps i am at a loss for what ones to order. I was hoping i could get some help....It does seem like i need all of the ones from the first post. Any help would be appreciated...Leave a comment:
No activity results to display
Leave a comment: