Michele Romano
New Member
Last Activity: 04-03-2025, 07:15 AM
Joined: 11-08-2024
Location: Polla
-
Anyone whi make reball on this cpu , which stencil use?? You think its the oxyde the problem and not a ball not good solder.... -
It return to fail after 10 days.... i would buy a station Achi Ir pro sc to make a good reflow or a difficoltose reballingLeave a comment:
-
It s CPU soldering after reflow start ok.Leave a comment:
-
I know that tv while are power on shut off and restart after remove the ac alimentation for 5 minutes. This for two times after nothing only red led on that flash if press remote or local buttonLeave a comment:
-
I see that the cpu is hot also in stand by... maybe short.....Leave a comment:
-
Salerno Italy. Thanks....Leave a comment:
-
Tv Samsung qe65q800at not power on
Hello this tv samsung qe65q800at, stuck in stand by if press power led blink but not power at all no light no sound. If disconnettere the mainboard the retr display light is ok . I have also disconnettere the panel , t con etc but notilhing
i have notice that also in standby i have 12,7 volt from psu and not 7.5 where is market on psu main.... -
Tv Samsung qe65q800at
Hello this tv samsung qe65q800at, stuck in stand by if press power led blink but not power at all no light no sound. If disconnettere the mainboard the retr display light is ok . I have also disconnettere the panel , t con etc but notilhing
i have notice that also in standby i have 12,7 volt from psu and not 7.5 where is market on psu main.... -
I have a laboratory , repair all , tv pc washing machine smartphone eletronic in generale. I am tecnic about 20 years of activityLeave a comment:
No activity results to display
Leave a comment: