hoaca388
Thank you very much. I will try.
ProAlex
New Member
Last Activity: 02-10-2025, 06:26 PM
Joined: 11-02-2024
Location: Yar
-
Leave a comment:
-
SN: 8CC8500Q8X
But according to the number on the case, I find that this is the Elitedesk 800 g4 dm and this number is written in the firmware, although the F81 board is exactly the same as in the Prodesk 600 g4 dm, I am confused.The computer was given away and said it would not turn on . I cleaned the firmware ME region, now it turns on itself and restarts every 30 seconds the image is not output , the USB keyboard is not active the backlight lights up for a short time .Leave a comment:
-
Please share a working bios dump for HP prodesk 600 g4 DM board F81 DA0F81MB6A0 REV A . There is no image and the usb is not active, it turns off after a minute, it does not show errors only when I remove the memory. The original firmware has damaged both images of the flash chips....Leave a comment:
-
Hi everyone, I'm Alex.Leave a comment:
-
Hi. I'm asking for help.
I also have this problem with the 800 g4 dm 95w.
The display port and USB do not work, the computer turns on with a button and turns off after a minute.
It does not show error signals .
[B]SN: 8CC8500Q8X[/B]
Thank you very much.Hi. I'm asking for help.
I also have this problem with the 800 g4 dm 95w.
The display port and USB do not work, the computer turns on with a button and turns off after a minute.
It does not show error signals .
[B]SN: 8CC8500Q8X[/B]
Thank you very much.Hi. I'm asking for help.
I...Leave a comment:
No activity results to display
Leave a comment: