Mekong500
Member
Last Activity: 04-15-2025, 09:39 AM
Joined: 10-26-2024
Location: Lublin
-
It works, thank you very much! -
Hi all. Could someone help me to remove enrollment from Hp 11a G8 EE S/N: 5CD019B4TL please? I've tried to modify the file on my own but after reflashing the chip and reinstalling from usb stick, enrollment comes back. I've attached both files, original and modified that I've tried. Thanks...Leave a comment:
-
I just tried this, I installed Win11 Pro and I was able to choose "I don't have internet". Thank you very much for your helpLeave a comment:
-
Just an info: Today I tried your method with another PC (same model optiplex 7070) and it works as it should, autopilot is removed. I don't know why it doesn't work with the first oneLeave a comment:
-
ST: DZS4813...Leave a comment:
-
Believe me or not, it added third autopilot_marker and now are three, two invalid and one valid. There is no reason to lie.
I read the chip after trying new BIOS file, reinstalling OS etc, it's ss of the new BIOS bin file in UEFITool...Leave a comment:
-
I've programmed the chip, soldered it back, erased the drive, insalled fresh OS and it's still the same as before, what means autopilot was not removedLeave a comment:
-
However you call it, I meant "unlock" because it won't let me go trough win11 setup because of autopilot. Seriously, you didn't understand?
Anyway, your file didn't work because company logo is still in fresh win 11. Let's finish this useless discussionLeave a comment:
-
Trying to be nice in every post, not only when I ask for help. I understood what to do from photos ("I see the differences between the files, but could you share your knowledge how it works?") but not why exactly that way. Did you read my previous post? I tired both files, yours and mine and none of them unlocked the pcLeave a comment:
-
I also might think that e.g. you were born on 3rd march and 0303 are your favourite numbers. Instead of giving simple answer you want to complicate things and write ambiguous phrases​. I appriciate your help, but if you don't want to treat people without condescension just don't answer my questions. I tried to be nice in my posts. PS I tried two versions 7878/0303 and both work the same - autopilot is still on after fresh installLeave a comment:
-
Thanks for the answer. I think you showed me the right path to do it. I just tried to change the value with HxD and check with UEFITool and it's invalid even if it's 7878 instead of 8343, so just last question, can I change it to any value and it's gonna work or it has to be 0303 like you did it? Sorry for many questions but I'm just trying to understand itLeave a comment:
-
Thank you very much, I'll try it in the morning. I see the differences between the files, but could you share your knowledge how it works? Is it gonna be the same with other of that model? I've got more of them and I don't wanna waste people's time and ask for help if I could do it o my own. ThanksLeave a comment:
-
Hello everyone, can someone have a look at my file? I want to remove autopilot but there is no AA553F or AA553C near autopilor_marker in the file. Any advice how to remove it? Thanks in advance. Dell optiplex 7070 [ATTACH]n3565816[/ATTACH]...Leave a comment:
-
Thanks! It works, I don't know what I've done wrong repairnig original file
...
Leave a comment:
-
Hi, can someone repair bios please? I tried to repair and clean ME but after reflashing laptop shows dell logo for one sec, then restarts few times and turns off.
Dell 5420 11th gen
SN: GXLR1F3
MB: LA-K491P Rev: 3.0(A02) 2021-04-28...Leave a comment:
-
I found different way which in my opinion is much easier than removing password, injecting DMI etc. I want to share it with you guys but I've tested this only with one PC so I may be wrong. If you edit ClearPwRtcRemoval hex it enables password removal after removing bios battery and all information like SN, SKU etc. stays untouched...
Leave a comment:
-
Thanks for your answer. I tried to do it, I have created a file using BCU, then I've added SN, Build ID etc. but after setting config and reboot it's still blank. Any suggestions? When i try to change it with command I'm getting this error...
Leave a comment:
-
Hello all, I have a question. I have HP Prodesk 400 G7 SFF, SN CZC134C1DB, it had bios password so i read the chip, removed password, flashed file back and password disappeared but all the fields like SN etc are empty. When i tried to inject DMI from the original file to unlocked one (without password) , password came back. Have you got any suggestions on how to fix it? I attached bin files, original one with password and cleared one. Thanks in advance for any help...Leave a comment:
-
Hi all, just started fixing bios faults and motherboards and I landed here
...
Leave a comment:
No activity results to display
Leave a comment: