Re: Westinghouse L2410NM 24" LCD power goes on and off, blue light flickers
Well, it's been awhile since i fixed this lcd and now it has started giving me a
black 2-3 inch wide band up the far right side of the screen (vertically). After
a few minutes it seems to fix itself. Happens on every input.
Any ideas?
I don't think I changed EVERY cap last time I fixed it.
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Re: Westinghouse L2410NM 24" LCD power goes on and off, blue light flickers
Good news. Monitor works! Problem is the bad cap 2200uF 10V I ordered is too tall for fitting under heatsink (temp soldered it in anyways). Don't order P14382-ND. It's too tall. I replaced the caps one by one to see which one is the problem. It is the 2200uF 10V one. Will order P12357-ND or P10230-ND Monday. retiredcaps, you have a preference between the two?
Leave a comment:
-
Re: Westinghouse L2410NM 24" LCD power goes on and off, blue light flickers
Wow, what a great forum this is. First off thanks so much to all who contributed to this thread - both the people with bad lcds and the people who have generously helped them.
My L2410NM LCD has the same symptom as markm75, Renesis13, jfrick and kosh. After a few hours of cap whining, the monitor permanently stopped turning on (now blue power light comes on for a second, then screen flashes very briefly, then blue power light disappears).
I suspected bad caps and started my...Last edited by l2410nm; 07-11-2012, 07:03 PM.
Leave a comment:
No activity results to display
Show More
Leave a comment: