Re: 50inch Vizio No Picture No Sound
Here are the pics...
Tsharp011
New Member
Last Activity: 08-03-2012, 05:40 PM
Joined: 06-28-2012
Location: Greenwood, AR
-
Re: 50inch Vizio No Picture No Sound
Here is a pic of the connection on the power board and the connection on the X sus from the power board. What kind of labels are you talking about that you would like to know, the part number or is it something else?Leave a comment:
-
Re: 50inch Vizio No Picture No Sound
Yes, I can do that but it will be later this evening before I can get them uploaded. Does it matter if its they Y or Z sus? Do you need pics of the power connecter plugged in and unplugged?Leave a comment:
-
Re: 50inch Vizio No Picture No Sound
Here are a few pics of the boards. On the X board the arrow shows what cap i replaced as it was blown. I must confess this was my first ever cap replacement, so is it possible to fry the board if i soldered it wrong. The square is around the only heat shield that was warm once the tv was plugged in for 10 minutes than turned off....Leave a comment:
-
Re: 50inch Vizio No Picture No Sound
No, there isn't any glow when the tv is on.
I will take a few pics when I get home tonight and get them uploaded on here.Leave a comment:
-
Re: 50inch Vizio No Picture No Sound
Yes, I have one.Leave a comment:
-
Re: 50inch Vizio No Picture No Sound
After reading a few threads, I have done some more investigation. I plugged the tv in for about 10 min and let it stay on. Then I unplugged it, took the back off and felt the heat shield things to see if they were hot. The bottom one on the Z sus board was the only one that was warm, all others were cold to the touch. Does the power have to cycle through the Z sus before it gets to Y sus and buffers?Leave a comment:
-
50inch Vizio No Picture No Sound
Noob to the site, this is my first post. I have read a few threads but haven't found anything for my exact problem. I have a 50" vizio plasma tv and here are my problems: No Sound, No Picture, When plugged in it has an orange standby light lit on the front and if I push the power button the light will turn to green and click but thats it. I took the back of the tv off and noticed I had a blown cap on the Z sus board. I have replaced that blown cap with a new one, and tv still wont work. I'm open to any suggestions on the next step. Thanks!
No activity results to display
Leave a comment: