Re: I need help with MS-6541

All of them have vents except TEAPO SEK 33uF 50V d=5mm. Bulged only TEAPO 1000uF 6.3V d=8mm. Near DIMM and AGP. All caps near MOSFET god one. I mean Rubycon, Chemi-con, Panasonic and Fujitsu. G-Luxon SM 470uF 6.3V d=6.3mm, G-Luxon SM 100uF 25V d=6.3mm, TEAPO SEK 470uF 10V d=5mm are located between PCI slots. One G-Luxon SM 470uF 6.3V d=6.3mm are located between DIMM and North bridge. And G-Luxon SM 680uF 6,3V d=8mm in the middle of everything North Bridge, AGP, SMCS chip, FAN connector, CPU 12V power. Too much so I cant relate it to anything.

Re: I need help with MS-6541

Sorry it is misspelling Rubycon MBZ 2200uF 6.3V d=10mm.

Does anything less than 470uF or 1000uF usually bulge ?

Re: I need help with MS-6541

Should I replace G-Luxon SM 470uF 6.3V d=6.3mm, G-Luxon SM 680uF 6,3V d=8mm, G-Luxon SM 100uF 25V d=6.3mm, TEAPO SEK 470uF 10V d=5mm, TEAPO SEK 33uF 50V d=5mm. They looks OK for now. Does anything less than 470uF usually bulge ? I am planing to buy my replacement capacitors from TopCat, but he doesn't carrying anything like this. I can't use bigger diameter of capacitors because of design of the motherboard.

My matherboard was made in 2002. It has 10 different types of big capacitors from from 6 different makers: Rubicon, Chemi-con, Panasonic, G-Luxon, TEAPO, and one unknown to me. It is total mix and much. So far I have problem only with TEAPO SM 1000uF 6.3V d=8mm capacitors. Question. Should I replase all of them because matherboard old and I don't want to replase any of them later? Or should I replase only bad one (TEAPO) and known to be bad (G-Luxon), and the one unknown to me? List of capacitors:

Big capacitors:
Rubicon MBZ 2200uF 6.3V d=10mm,
Chemi-con KZE 820uF...