Re: Need help! Parallel Cap...
Keep peace your mind! I replaced array cap and array resistor for many times. But this time I cant find any other C221. Which array cap I can replace same with C221?...
kids
Member
Last Activity: 08-20-2006, 08:41 PM
Joined: 10-14-2005
Location:
-
Re: Need help! Parallel Cap...
My board is MSI (MS5187 VER:1).
But I want to know I can replace C221 with C181, yes or no.
ThanksLeave a comment:
-
Re: Need help! Parallel Cap...
You are right! Some (or almost) mainboard use single cap for 4 PS/2 lines, we can replace each cap if it go bad. But with SMD 4 capacitor array - as you type - we must to replace if only 1 of 4 is bad.
But I cant find any other C221, but in my hand, I just have C181. I can not replace each other, can I? So bad!
...
Leave a comment:
-
Need help! Parallel Cap...
I'm repairing mainboard with bad PS/2 ports. I try to replace a parallel cap (near PS/2 ports ). Cap sign C221, please tell me that is C-apcitor 221-22x10^1=220 picofara, is that ?
And I dont find any the same Cap with 221, just only C181. So can I replace C221 with C181?
Thanks. -
Re: too high voltage!
You can show me whre? I checked parts from line 12V and 5 V only. I think some registers with wrong value make wrong out voltage but I dont find any bad parts.
...
Leave a comment:
-
Re: Replace same rate - not same size
I replaced GSC 1500uF-6.3V-8mm with Nichicon 1500uF-6.3V-6mm. My replaced mainboard is Gigabyte EP-3WEM2. All caps are around CPU (near FETs). It ran OK for 3 days.
Hope for more long time.
Leave a comment:
-
too high voltage!
My PSU ATX 400W generated out voltage too high. It burned out my HDD with (nearly), 17V(for 12V line) and 7V (for 5V line). I checked all part inside and replaced all some bad caps 1000uF-10V,16V. But nothing change! Voltage 's still too high. Please tell me why (?)
(Line 3.3V is nornal)
-
Raplace same rate - not same size
What's happen if we raplace badcaps with good same rate but not same size? I want to replace 11 badcaps 1500uF-6.3V- 8mm by 1500uF-6.3V but ony 6mm. It run OK after it's replaced but it 's OK for long time? It can be broke again? -
FET - Replace with same part?
I have shorted FET (76139S), but I dont kno to replace which other (same part/similar part)
Please choose for me! Thank
____________________________________
Printer Services: [url]http://www.printerservices.info[/url]https://I have shorted FET (76139S),...ces.info[/url] -
Re: Soldering How-To
Ahhhh!!! Carefullyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy!!!!
If you want to broken copper hole, need one drilling-machine (1mm) I think!!!Leave a comment:
-
Re: MS-6334 need help!!!!!
Thanks for your help!!! I'm trying. Hope it's working.
Here my way:
EC11->EC19 : caps 1000uF-10V (10x20mm)
EC4, EC5: 1500UF-10V (8X23mm)
OK???Leave a comment:
-
Re: MS-6334 need help!!!!! -Pics
Here my Pics but it's so bad!!!...Leave a comment:
-
MS-6334 need help!!!!!
Hi all!
Mainboard MSI MS-6334 bad cap EC4, EC5, EC11->19.
I desolded for long time and now I don't know which value for each one.
Pls check and show me value!!!!!
No activity results to display
Leave a comment: