it worked, thanks man you are the king,
im in bios settings and spv disabled, i did "load setup defaults" as well. I closed computrace from enabled to as "permanently disabled" , do you know if extra steps needed further?
can I use laptop with this bios bin or I need to find clean default bin?
Thanks!...
giokxan
New Member
Last Activity: 10-14-2024, 03:43 AM
Joined: 09-18-2024
Location: Istanbul
-
ok sorry ,saw it wrong. I will try now with that new patch
Does it matter if I keep SSD removed and attached during this trying?
...Leave a comment:
-
your attachments are same with what I uploaded, do you mean I should try with initial (original bin with svp)?
What is open setup...Leave a comment:
-
attached now...Leave a comment:
-
https://[URL]https://filetransfer.io... DX120 NM-B141[URL]https://filetransfer.io/data-package/XXWffcco#link[/URL]
Cant upload as attachment, it doesnt allow .bin extension
I put in link initial and patched one I did as instructed
Its 20HQ - DX120 NM-B141Leave a comment:
-
i cant reach bios menu, because its getting stuck "Entering Setup..." after pressing F1...Leave a comment:
-
You mean writing default/original bios of this model,right? Not the initial one I read & save at beginning before patch?
Any X1 Carbon bios bin would be ok or 20HQ model level compatibility needed?...Leave a comment:
-
Hi,
I patched bios and passed the section it asks supervisor password and I pressed any key, then 2x space etc.
Now it`s stuck in "Entering Setup" section after I press F1, I also removed SSD before starting laptop.
What can be the problem? Should I erase patched bios chip and put original default one from web or?
Its X1 Carbon 20HQ
Thanks...Leave a comment:
No activity results to display
Leave a comment: