Re: Hanns*G HC194G Slow start



Took me a long time because I really didn't want to deal with the tiny audio wires and I had a really nice spare monitor on hand. I can now confirm that the above part numbers are an exact replacement for the four pin, three used, speaker plug and pins.

If you need to repair this connector, get extra pins. I needed three and between crimping slippage and dropping the tiny things, use six. They're cheap. I bought 50 and my order with caps was still under $6.

If you haven't used this kind of pin before, note that...

Re: Hanns*G HC194G Slow start



Late to the posting but for anyone else turning this up in a search...

I couldn't find any kind of clip. It's just really difficult to unplug the speaker connector without ripping the wires out, as I did.

This kind of plug is a plastic housing which holds "pins". The wires are crimped onto the pins and then the pins are inserted into the plastic housing.

If you rip out any of the wires the easiest thing is probably to remove the old, disconnected pin from the housing, crimp the wire...