And you are absolutely correct!

First of all let me clarify my previous post where I claimed that I was receiving random write errors on each test.

Thanks to this reddit post ([URL]https://old.reddit.com/r/GPURepair/comments/1f5hpec/help_needed_gpu_memory_write_errors_detected_by/[/URL]) I learned that this is normal and is a false positive because I was testing a card that is working as a current display.

Running command ./mats -b 60 -e 70 excludes first 60 MB of memory from test and after that all my memory chips showed 0 errors even running ./mats -b 60...

Thank you for your help.

I don't have good news unfortunately.

I decided to run another session of MATS (the previous one that showed no errors I ran couple of weeks ago where to problem was less frequent). Here are some of my results. What's "funny" is that I can run a test showing absolutely no errors just to rerun the same test 5 seconds later and I have a bunch of errors and then another test showing completely different results. I tested multiple version of mats and all of them show random stuff.

I am not an expert but for me the only logical...

Hi All,

I have a problem with my 1070Ti.

9/10 times card fails to post in PCIE x16 socket. When it finally posts it shows random PCIE reading in GPU-Z. Rarely it shows x16, most of the times it will be either x4 or x1, sometimes x8. But still it will crash with BSOD in x16 slot sometimes even after 1 minute and sometimes it will happen after an hour.

Moving card to x4 PCIE slot improves it. It will post most of the time (I would say 8/10 times) and I can even play games for hours at full speed (I haven't spotted and slow downs in FPS vs x16). However randomly...