Are you able to prepare a new BIOS version 1.41 for the same service tag as in post #134?
For some reason, every update from version 1.38 to a newer one (1.39, 1.40, 1.41) causes the computer to not boot....
hcx
Member
Last Activity: 02-26-2025, 02:13 PM
Joined: 09-06-2024
Location: Nit
-
Sparklingx[USER="558084"]Sparklingx[/USER] Thanks for the tip. I had the same problem. I used a 22uF 16V capacitor and now the programmer no longer disconnects, it works correctly.
My programmer has the marking CH341 on the bottom, not CH341A, and the voltage is 3.3V onLeave a comment:
-
Using the bin file from you I have version v1.38. And after updating to v1.39 same issue occurs....Leave a comment:
-
It appears that bios v1.39 does not work on this unit....Leave a comment:
-
Thanks, your bin is working!
What was wrong with my fix?
I can read in the bios events that upgrade from v1.38 to v1.39 was successful. So what was wrong?
After update to 1.39 same issue again. Laptop not starting....Leave a comment:
-
S/T: 69Q9433 Board: DAZ20 LA-F311P Rev: 3.0 (A02)...Leave a comment:
-
S/T is in dump at address:
- 0x8516CF
- 0x8596CF...Leave a comment:
-
My laptop stop working after bios update from 1.38 to 1.39. Caps Lock is on for 30 seconds and noting happen. Power button is on all the time. Display test, CMOS reset (press Power button for 25s) are working. Missing RAM is detected.
I was trying to fix bios dump but nothing changed.
Can someone check dump and fix?...Leave a comment:
-
Hi, I'm trying to fix not working bios dump. What are the bits changed in [B]Descriptor region[/B]:
0x131 [B]6D[/B] -> [B]00[/B]
0x134 [B]01[/B] -> [B]00[/B]
0x202 [B]F0[/B] -> [B]40[/B]
?
How did you get [B]MFS[/B] partition with [B]OEM Configuration[/B]?Hi, I'm trying to fix not working bios dump. What are the bits changed in [B]Descriptor region[/B]:
0x131 [B]6D[/B] -> [B]00[/B]
0x134 [B]01[/B] -> [B]00[/B]
0x202 [B]F0[/B] -> [B]40[/B]
?
How did you get [B]MFS[/B] partition with [B]OEM ConfigurationLeave a comment:
-
HiLeave a comment:
No activity results to display
Leave a comment: