Re: Hanns-G HG281D 28" TFT - Multiple Problems

Gentlemen Thnkyou for all your help on repairing my monitor. I am having a major problem locating a replacement mother board for this computer. I have found several on line but all are sold if anyone has a spare or know where I can find one. I need it right away. If you do not know which board it is, it is the board next to power supple under the metal box with the ribbon cable to the monitor control board. Thanks Bill R Also a good source for caps with no minimum is Allied Electrical in Fort Worth Texas and they ship everywhere....

Re: Akai LCT2662 with bad caps

I just replaced the 3 main 1000 caps in the center of the board between the to retifer bridges all three were popped. After replacement and time for them to chargeup. Red ready light goes to green with the standby switch pushed and the unit began working as expected. I chose to replace the bad ones first and try it out befor wasting a lot of time replacing the ones that looked ok. We will replace them all now just for good measure. I recommend bench checking unit before it is reassembled just to save time but do not touch any of the high voltage parts...