Re: Panasonic G20 Failure :/
None of the boards on my tv have a LED light indicator.
Either way, IT WORKS!!!! Replaced the SC Board and she started right up!! Works flawlessly again! Thank you Tom66 for all your help!
Falco21
Member
Last Activity: 06-17-2012, 09:42 AM
Joined: 06-06-2012
Location: Miami/Florida
-
Re: Panasonic G20 Failure :/
Well this sucks! LOL
Trial and error like I've been doing I guess :/Leave a comment:
-
Re: Panasonic G20 Failure :/
New SC Board is on the way.
Seems like the problemLeave a comment:
-
Re: Panasonic G20 Failure :/
Yes it is very brief. Flashes on and off. I tried holding on there, but the reading only shows a few times, not all the time.Leave a comment:
-
Re: Panasonic G20 Failure :/
I sometimes can get a reading, and sometimes it shows nothing. The SC Board showed a few times a reading of 104 then 105. The SS Board showed a few times 198 or so.Leave a comment:
-
Re: Panasonic G20 Failure :/
I don't understand what you mean by "probe between the brown and white power connector wires".
Also, if it means anything, when I tried to connect the power wire to the SC Board, it sparked....Leave a comment:
-
Re: Panasonic G20 Failure :/
Unplugged the SS Board and the light now blinks 4 times.
Plugged the SS Board back in and tried the SC Board. When unplugging the SC Board, it blinks 7 timesLeave a comment:
-
Re: Panasonic G20 Failure :/
Here is one of the entire back:
Main Power Board (That I replaced):
A-Board (That I replaced):
SC Board:
...Last edited by Falco21; 06-06-2012, 02:44 PM.Leave a comment:
-
Re: Panasonic G20 Failure :/
I just ordered the SC Board this morning.
And yes, I do have a multi-meter. What do you need me to check?
Thank you for your help!!...Last edited by Falco21; 06-06-2012, 02:30 PM.Leave a comment:
-
Panasonic G20 Failure :/
New member here. Been on forums for a long time.
I currently have a 50" Panasonic G20 Plasma. TC-P50G20
It is about 2 years old and has worked flawlessly. The other night I was watching TV and when I shut it off, I heard a pop noise. Tried to turn it back on and now all it does is attempt to turn on, then turn itself off. The red LED light blinks 10 times. I replaced the Power Board and the Video Board, still with the same issue. The only board I have not touched is the Y Board. Does anyone know what could be causing this?
No activity results to display
Leave a comment: