Re: Samsung 2220wm 2nd go!
hmmmm. plugged in the monitor and lowered the levels to 20% and 59%. My daughter, whom i didn't tell about the levels, jacked the brightness back up to 100% and so far, it works fine.
Thank you to the guys at HEGE supporting Badcaps [ HEGE ] [ HEGE DEX Chart ]
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Re: Samsung 2220wm 2nd go!
Lowering the level of brightness to 20% and contrast to 59% seems to keep the screen on. Does this narrow down the issue? I haven't changed the capacitors since they look good.
Leave a comment:
-
Re: Samsung 2220wm 2nd go!
Thanks for the reply budm, you were the one who help me originally. Here is a picture of the original pull of the board. it looks like i did replace at least 2 of those blue caps. Should I just try to clean up the soldering? or replace the caps? Looks like the burn was there the 1st time....
Leave a comment:
-
Samsung 2220wm 2nd go!
Hello All,
I got 1.5 years out of the last repair. Now I have a new issue.
The "out to black" in XX seconds. I turned the monitor off then back on... to adjust the brightness... works for a minute, then back to black.
I took out the board and before I dive in to changing the capacitors (which look fine, no bulging), I wanted to get the advice of the pros here.
Here are pictures of the board.
Thanks in advance,
ryan...
-
Re: Samsung 2220wm, bad capacitors ordered... however, how do i order these???
BOOM! Replaced and Perfect!
Funny story tho.... I soldered all capacitors, and the two smaller blue capacitors. Was so proud of myself, and excited to turn on the monitor. To my dismay, it didn't work! So, again... i open up the monitor to find i had soldered a 680 in backwards! DOOOOH. Must have been the inexperience... or the 3 bourbons in. Never drink and solder. HA. I ordered 2 more 680's from the guy who sent me the original 6... arrived 5 days later and works perfect.
...
Leave a comment:
-
Re: Samsung 2220wm, bad capacitors ordered... however, how do i order these???
Thanks guys... I'll post once replaced.
Leave a comment:
-
Re: Samsung 2220wm, bad capacitors ordered... however, how do i order these???
Thanks for the advice Budm. As per your request, Jetadm123, here are the pictures. sorry for the delay. I was trying to get the best photos... and had to rely on my old trusty camera.....
if you need higher resolution.... let me know....
Leave a comment:
-
Samsung 2220wm, bad capacitors ordered... however, how do i order these???
Thanks in advance for helping. As stated above, i have a Samsung 2220wm. Started blinking in and out. 1 second on, 1 second off.... etc. I unplugged the monitor and left off for about a week. Plugged it back in... and it worked! So, left it hooked up for about 1 week, then it started blinking again. This time, i decided to look up this forum and what a major help it has been. I found the 2 capacitors were "bulging" The Green 680's. i also noticed the two "blown" and "brown" looking items. 1. Please can someone tell me what they are? and 2. where can i order them?...Last edited by alwaysthinking; 07-09-2012, 03:43 PM.
No activity results to display
Show More
Leave a comment: