Re: Hanns-G HG281D, LCD Monitor no power

Hey sorry guys its been a while and I knew that my pics were not of good quality but I did manage to change the caps and its powers up no problem.. Vga works but has flickering and the hdmi works for about 10-15 seconds and goes blank. But if I unplug it and let it rest for 30min-1hr, it will pop back on for 10-15 seconds. Inbetween that rest period it wont show anything with hdmi. Sounds like a logic board problem? If so, what are some things that can cause this type of issue besides bad capacitors?

Re: Hanns-G HG281D, LCD Monitor no power

Hey guys, new to the forums but I have a Hanns-G HG281 and I had a fuzzy screen for a while so I finally had the time and took it apart. I took a look at everything and I found an area on the logic board where it was burned. I put everything back together and now it doesn't even power on. Any help would be greatly appreciated. Pics below of power board and I'm assuming that is the problem


...