Hi [USER="341209"]volinakis[/USER] , I flashed the bios, soldered it back, now the fans don't even turn on, there's no post, no image, initially the fans turned on for a few seconds.
Could this be caused by the new bios ?
Thanks again !volinakisHi [USER="341209"]volinakis[/USER] , I flashed the bios, soldered it back,

Hi again [USER="341209"]volinakis[/USER] , sorry for the spam but I come with a proper dump now.
Turns out the Motherboard on these a715-42g models have some interference that don't allow you to read the bios chip properly while the chip is still mounted on the board by using ch341a and Clamps.
So I got a ch341a flash socket, removed the bios chip from MB and managed to read it / identify it with NeoProgrammer 2.20 in the first run.
I made 3 dumps and compared all with HxD editor and they are all similar, here is the dump, could you kindly adapt the DMI thing you mentioned?...

Thanks for the Bios file Volinakis !
Just a question now, can I add it on a Fat32 USB drive and use the FN+ESC+Power button method to flash it ? Or do I need the ch341a programmer and directly erase/flash the chip ?

Hi volinakis, thanks for the provided bios, now my question would be can I use some kind of USB + key combination method to install the new bios or do I need to use a ch341a programmer ?
Thanks again !!

Hi SMDFlea, That's the thing I believe mine is corrupted after an outage during update but here it is...

Can someone please help me with a bios dump for Acer Aspire 7 A715-42G-R2YB
SNID: 25000975334