The traces are not very clear

Was just away for the weekend. Just getting back. The fans connect into the red and white ports on the board

Is anyone able to modify the bios to change processor settings. Id like to be able to disable E cores for example.

why would I replace all the parts when there not broken. I would rather ID what is wrong and fix that part. Not being cheap its more of a pet project at this point...

Yea that ring was me just doing a quick resoder to get it back on after testing. Ill fix it up more later.
Too more pictures, It doesnt look burn in person its more of a shaddow in the pictures I think. Hence the angles...

Fan connect into the top right plugs the red an white 2 pin

Rings?...

Just not powering the fans it seems. Lights and temp lcd come on...

Full size pics attached.
Yes it displays the correct temp. The unit has a top and bottom with the same control board. I swapped the boards and everything works as expected. So i know for sure its a component on this board....

Anyone have an experience with this board? Ive actaully replaced 2 caps on it before. Worked for a few years. However this time around they all seem good. Ive pulled a few and tested they all test in range. Checked a few of the diodes they all seem good. dont see any popped resistors or anything. The light and screen power on however the fans never kick on. Havent found a skematic for this board however my guess would be a component in line with the fan.

[ATTACH=JSON]{"alt":"Click image for larger version Name:\t1.jpg Views:\t0 Size:\t111.8 KB ID:\t3292895","data-align":"none","data-attachmentid":"3292895","data-size":"custom","height":"355","width":"486"}[/ATTACH]...